Ford 4x4 cossie chassis build ?

[Cyberbeej]

If your gonna build the chassis to take the 4x4 gearbox then i would start by measuring the box compared with the 2wd version and widen the chassis in the beginning as you need the room for the front shaft running by the pedal box. since your going down the V6 route then the option of moving the engine over to accomodate the shaft isnt available.

I dont see that being the big problem. The front suspension, steering and driveshaft trying to occupy the same space might be the problem. you may have to move the suspension inboard but space will be tight.