Introduction and progress so far

Eddy Introduction and progress so... 6th May 2012, 10:00 PM

K4KEV welcome to the forum... 6th May 2012, 11:55 PM

will_08 You've made a good start... 7th May 2012, 07:27 PM

shh120m youve definatly got your... 7th May 2012, 07:44 PM

Johno Hiya, Good luck with the... 7th May 2012, 08:28 PM

HandyAndy Hi, As others have said, best... 9th May 2012, 12:51 PM

Eddy Hey guys, I've not posted... 6th November 2012, 08:57 PM

ayjay Top job --Well done .:) Not... 6th November 2012, 10:19 PM

Eddy Its a bit late for that - I... 7th November 2012, 12:11 PM

mark Its dead easy anyway, i did... 7th November 2012, 12:22 PM

Eddy I know who to come to when I... 8th November 2012, 08:36 AM

Eddy Painted! 12th November 2012, 09:40 AM

AshG Where in Kent are you eddy?... 12th November 2012, 11:18 AM

K4KEV must be a helluva iron Ash:D... 12th November 2012, 11:59 AM

flyerncle Industrial me thinks.... My... 12th November 2012, 12:41 PM

Eddy I based in Birchington, near... 12th November 2012, 05:18 PM

AshG Ben Copeland is down in... 12th November 2012, 09:41 PM

twinturbo I spent a year in Rochester,... 12th November 2012, 09:49 PM

Eddy Few bits arrived from Phil... 17th November 2012, 05:38 PM

Eddy Been doing a bit more... 30th January 2013, 09:35 PM

Eddy Half rolling 23rd March 2013, 07:00 PM

rpjg1975 Coming along well. Are they... 23rd March 2013, 09:03 PM

K4KEV yep thats damn good... 23rd March 2013, 09:33 PM

Eddy Yeah, the wheels are escort... 23rd March 2013, 10:19 PM

will_08 Well done Eddy, i'm hoping to... 23rd March 2013, 10:19 PM

rpjg1975 Definitely work well. Mine... 24th March 2013, 11:11 AM

mark Your front upper wishbones... 24th March 2013, 11:51 AM

Eddy You may well be right Mark, I... 25th March 2013, 08:26 AM

robo Not meaning to piss on your... 26th March 2013, 09:56 AM

Eddy I appreciate the comment Bob,... 26th March 2013, 12:57 PM

Eddy All four wheels and some... 14th July 2013, 12:47 PM

Eddy Dropped the engine in today... 21st July 2013, 07:54 PM

Oscar Very nice, looks like you're... 21st July 2013, 08:47 PM

Eddy Thanks Oscar, I'm sure you'll... 22nd July 2013, 07:42 AM

TheArf Looking well tidy... 22nd July 2013, 10:15 AM

Eddy Just an update with a bit of... 3rd December 2013, 09:02 AM

SeriesLandy Hi Eddy. I've ended up taking... 3rd December 2013, 08:01 PM

voucht Hi Eddy, I think you should... 3rd December 2013, 09:32 PM

Eddy Steve - I hadn't thought... 4th December 2013, 01:03 PM

flyerncle You would be surprised how... 4th December 2013, 03:49 PM

ayjay Dont forget to weld some... 4th December 2013, 10:14 PM

Eddy Bank holiday progress 21st April 2014, 06:08 PM

Eddy Then I spent today... 21st April 2014, 06:15 PM

voucht Looks very nice and tidy... 21st April 2014, 06:34 PM

Eddy I’ve been making a bit more... 24th June 2014, 08:12 AM

Enoch That's all looking rather... 24th June 2014, 03:10 PM

AshG looking good. nice to see... 24th June 2014, 11:14 PM

Eddy Whilst building, I'm going to... 25th June 2014, 09:38 AM

alga In my experience the abuse... 27th June 2014, 12:18 PM

Eddy Hello all, I haven’t updated... 2nd February 2015, 07:43 PM

Eddy Afternoon all, Another long... 10th December 2015, 01:31 PM

SteveH1 Japers that looks good fair... 10th December 2015, 10:47 PM

Eddy Getting some time to work on... 17th March 2016, 01:42 PM

Eddy Another few months since my... 31st August 2016, 01:31 PM

flyerncle Try dropping the needles a... 1st September 2016, 08:51 AM

Eddy I can't believe it has been 4... 6th October 2020, 04:21 PM

twinturbo Looks like the garage was... 6th October 2020, 09:21 PM

Tatey The car is looking good, it... 7th October 2020, 09:33 AM

jps A good list! I've got a... 16th October 2020, 03:29 PM

twinturbo mine has a little 4 wheel... 22nd October 2020, 06:48 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode