MX5 Donor, Using as a Donor/problems/solutions/advice Info

ROADSTER FORUM TO CLOSE

		Haynes Forums > Haynes Roadster Forums > Donor cars
MX5 Donor, Using as a Donor/problems/solutions/advice Info

Thread Tools

Display Modes

#13

28th December 2012, 03:51 PM

Talonmotorsport Talonmotorsport is offline

Senior Member

Join Date: Oct 2007

Location: Southminster Essex

Posts: 1,323

Have you thought about making a bracket out of some 5mm plate that looks like this at all? Remove all the blocks/brackets around the nose fit some 3/4-19mm round stock with 12mm through holes in the 18-19mm holes in the nose and use M12 bolts.

__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 10:41 AM.