|
|
#34
30th December 2012, 02:49 PM
|
||||
|
||||
The bulkhead panel has now been made and it was a bit of a nightmare to bend that large of a panel, I ended up having to clamp it between a 1.5m long bit of 50x50mm box and some angle iron and clamp it in a vice and then go at it with a bit of wood and a hammer.
   As I always manage to do with these aluminium panels, I missed with the hammer and it has a nice crease mark in the middle where there was a massive dint, but I'm sure I can find something to cover it up and then if I still aren't happy with it when I have finished the car I will make a new panel.
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode