Engine wiring loom: where to buy?

[twinturbo]

I doubt they would build an engine loom as the plugs are almost impossible to buy.

EFi pinto stuff is very sought after.

TT

[alga]

AFAIU custom looms usually come without the connectors, you have to wire up your own.

[voucht]

Thank you for the answers.
Simon, I contacted Premier looms them between xmas and new year, and no reply so far. May be they are on holidays... we'll see.
TT, one more time you confirm the suspicions I had... I think it is going to be difficult.
Al, this is an interesting information. What is the point to have a loom done if there is no connectors? Simon, do you confirm the loom you got from Premier was without connectors?

[alga]

Ah, sorry, I thought you were speaking of a custom body loom. I doubt anyone would be able to build you a custom engine loom without a donor loom for plugs. Did you investigate the possibility to get an original one from Ford?

[Tatey]

The loom came without connectors, you need to make them yourself, however they do come with relay holders and fuses boxes in place, also as every cable is a different colour it makes fault finding so much easier.

[voucht]

Originally Posted by alga

Ah, sorry, I thought you were speaking of a custom body loom. I doubt anyone would be able to build you a custom engine loom without a donor loom for plugs. Did you investigate the possibility to get an original one from Ford?

I'm thinking more and more about using the DOHC from the donor in the roadster. I really wanted the Pinto EFI, but it looks like it will be only troubles to try to connect and use it.
Thank you for the infos I keep you informed when I make my mind.

[TheArf]

Sylvain have you tried these people, they have a good reputation amongst the classic car community

http://www.s-v-c.co.uk/

Arfon

[twinturbo]

It's the ford specific connectors that snookers everyone.

You can get a few in the states but some bit's are just not available.

TT