25mm or 1in?

[vmax1974]

Originally Posted by twinturbo

Seriously, if your doing the whole chassis forget stock...

Buy a flat pack.

Safer,
Quicker,
More acurate,
Easier logisticaly,

More expensive but this is recouped partly against cutting tools, plasters, fuel to get to A&E, Etc...

TT

Couldn't agree more I cut my own chassis so far it has took me a year been through countless boxes of plasters and have been to a+e with a broken nose and shrapnel in my eye

Cant agree with the more accurate comment as I have been really anal over my cuts

Flat pack it the way to go

My advice is take phil up on his offer

[twinturbo]

Originally Posted by vmax1974

Cant agree with the more accurate comment as I have been really anal over my cuts

Ahh, we would have to go to full statistical analysis to work out overall, over all builds, the total number of cuts made that are accurate and inaccurate. Obviously yours would sway the figures closer to accurate for the self cutters

So are we all up for full statistical analysis

TT

[Oscar]

And I sway the accuracy the other way!

Cut all mine slightly erring on the long side, then ground down to fit snug. Means that it all fits nicely, but I've probably spent nearly £60 on cutting and grinding discs and thats before you consider the £150 for the steel. Deffinately should have gone flat pack

On the upside, I've used 2.5mm thick to counteract my possibly poor welding and large engine, so it all averages out in the long run. Doesn't it?