Exhaust Smoke coming out the inlet?

brainbug007 Exhaust Smoke coming out the... 2nd January 2013, 10:57 AM

Not Anumber what engine have you got... 2nd January 2013, 11:15 AM

brainbug007 1.8 CVH with zx6r carbs 2nd January 2013, 11:16 AM

Not Anumber Do you still get it when the... 2nd January 2013, 11:25 AM

brainbug007 I haven't got the coolant... 2nd January 2013, 11:34 AM

Not Anumber fingers crossed. Heres hoping... 2nd January 2013, 11:40 AM

Talonmotorsport Sounds like a worn valve not... 2nd January 2013, 12:38 PM

The V8 Files CVH has hydraulic lifters I... 2nd January 2013, 01:07 PM

TheArf Did you have the head to bits... 2nd January 2013, 04:18 PM

brainbug007 Nope I only renewed the... 3rd January 2013, 08:54 AM

Talonmotorsport Take the head off and give it... 3rd January 2013, 09:14 AM

snapper At this early stage and... 5th January 2013, 08:24 AM

twinturbo if the lifters were not full... 5th January 2013, 11:30 AM

snapper If the lifters are slow... 5th January 2013, 12:27 PM

twinturbo They don't return. They... 5th January 2013, 12:44 PM

snapper They have a spring in them... 5th January 2013, 01:19 PM

twinturbo Why on earth would they do... 5th January 2013, 04:52 PM

The V8 Files I'd still say it needs... 5th January 2013, 06:17 PM

twinturbo Got the official ford... 5th January 2013, 06:38 PM

The V8 Files I got Tis, it was just easier... 5th January 2013, 06:45 PM

robo It could be as simple as a... 5th January 2013, 06:46 PM

Joelove Not sure if this helps but I... 25th January 2013, 07:31 PM

brainbug007 Thanks for all the replies on... 30th January 2013, 03:20 PM

twinturbo It can't be that long can... 30th January 2013, 05:31 PM

brainbug007 Ya it's amazing really how... 1st February 2013, 10:38 AM

Talonmotorsport It does not matter how long... 2nd February 2013, 09:31 AM

#22

25th January 2013, 07:31 PM

Joelove

Member

Join Date: Mar 2012

Location: Boston lincs

Posts: 72

Not sure if this helps but I had an R6 a few years ago and had problems with it bogging down when pulling off, took it to a bike repair shop and they found it to be berthing back out the inlet, turned out to be worn piston rings. Might be worth considering. Joe

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 12:41 AM.