Ebay Haynes supplier - Louthyz

[TheArf]

Well i grit blast my own and powdercoat and i wouldn't charge that much but im only doing it for myself and mates

Arfon

[jps]

Upper harness mounts and Pinto engine mount plates turned up in the post on Wednesday. Just had chance to offer them up to the car.

Must admit, on arrival I was a bit skeptical, i had expected something very cleanly cut and drilled - and the engine mount plates looked quite 'handmade' - the holes for the bolts were all oval rather than round.

However - offered them up and they fit absolutely fine. And the original Ford mounts themselves have a fair degree of play in the bolt holes themselves.

So I'm happy all round with what i've received - and wouldn't hesitate to use the chap again if there were anything else I wanted.

[Stot]

Originally Posted by jps

Upper harness mounts and Pinto engine mount plates turned up in the post on Wednesday. Just had chance to offer them up to the car.

Must admit, on arrival I was a bit skeptical, i had expected something very cleanly cut and drilled - and the engine mount plates looked quite 'handmade' - the holes for the bolts were all oval rather than round.

However - offered them up and they fit absolutely fine. And the original Ford mounts themselves have a fair degree of play in the bolt holes themselves.

So I'm happy all round with what i've received - and wouldn't hesitate to use the chap again if there were anything else I wanted.

Thas pretty much my experience. Looks like there is a bit of backlash on the machine causing slightly irregular holes, but everything mates up so all good.

Cheers
Stot

[AshG]

i ordered 2 ru4's of this guy they took 3 days to turn up when they said they were on the shelf and to be frank they were rubbish! the things weren't even symmetrical or square and i could have cut them out more accurately by hand with the grinder

[Stot]

Originally Posted by AshG

i ordered 2 ru4's of this guy they took 3 days to turn up when they said they were on the shelf and to be frank they were rubbish! the things weren't even symmetrical or square and i could have cut them out more accurately by hand with the grinder

Hi Ash,

Was it the accuracy or the finish that's bothering you? They are plasma cut rather than laser cut so the finish to the edges is rougher so I could see where you're coming from on that if you were expecting more but the accuracy of the parts Ive had done was fine.

3 days for second class posting metal doesn't seem bad either?

Should point out I have no affiliation with him just interested.

Cheers
Stot