TwinTurbos Build Diary....

[twinturbo]

Don't worry, I have not gone of task yet....

Rear reflectors have been fitted, and I have made up the plinths for the NAS fog and reverse lamps ( photo's to follow ).

The NAS lamps are 100MM in diameter, I spend ages on ebay looking for some container or tube I could cut down to make the plinths. Ages..

Then on B&Q's website I spotted 100mm ventilation ducting.

Went to B&Q and a ~50CM section was nearly £8... However they do a "telescopic" section which is ~40CM of 100MM with ~40cm of slightly larger. ( so almost the same length on the 100MM more material in total, more complex to sort for the supplier , so of course it's under £5 ( go figure.. )

Cut the plinths flush to the rear panel and have started to spray them up.

Also carried on with the dash and have cut out the switch panel ( it's a separate unit to the main panel in case it needs changing. It's been trimmed and the switchpack fitted... Now to move onto trimming the main dash pad.

TT