Stots Build Thread

[Stot]

Hi Mick,

They do have a bend in them, they are Phil @ Talons design. The idea is to stop them fouling the steering rack at full steering lock and it certainly does that. There shouldn't be any real stress through the bend as most of the load will be at the two ends.

The front will sit lower once I get the proper mounts welded in.

Not sure about my rear shocks though. May need to send them back for some shorter ones. I ordered 14" Open 9.5 Closed which is fine for the front but I'm close to bump stop at the rear so may go for some 12" - 8.5"s

Cheers
Stot