MX5 Donor, Using as a Donor/problems/solutions/advice Info

[Johno]

Originally Posted by Davidbolam

Johno,

I really like the look of the agm bodywork and have my engine as far back as possible. When I looked at their measurements of their kit I'm not sure it will kit.
Can you tell me how far your engine is from the front member?

Hi David,
I measured from the front of the water pump pulley to the front cross member and it's approximately 300mm. I wish I moved the engine back a little more though as the cam cover just catches the bonnet right at the front. Not too much of a problem though as I plan to fit a bonnet scoop anyway..