|
|
#34
19th May 2013, 11:14 PM
|
||||
|
||||
I've now managed to wire the headlights, radiator fan, reverse switch, handbrake switch and horn. I'm waiting for a few more connectors to allow me to wire up the rear lights. I've also tidied up the loom slightly by running some cables down the sheathing for the reverse switch/handbrake switch.
The fuel lines are now complete after my 10mm fuel hose + 10mm to 8mm inline adapters arrived, I just need to order some more 8mm fuel hose as the braid has become a bit knackered at for the fuel filter hoses + some hose finishers to complete it. Below are some pictures:    
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode