|
|
|
|
#1
21st June 2013, 09:24 PM
|
|||
|
|||
just starting to refurb my front hubs ive read that the hole needs making larger for the ball joints what has everyone used for the job i saw ash g had used a reemer
|
|
#2
21st June 2013, 11:07 PM
|
|||
|
|||
Use bmw 5 series track rod ends. That is what I am using, and they are the perfect taper for the mx5 hub. Try and get ones for a saloon around 1995. If you like I can dig out the part number ? Eurocarpats.com are really cheap for them, just type in 2l petrol and they will pop up. I bought mine when they had a sale on, which they have frequently, and they were 2 for £11 delivered. Keep in mind that if you do use them, the threaded insert in your front top wishbones have to be tapped out to m14 x 1.5
|
|
#3
22nd June 2013, 10:25 PM
|
|||
|
|||
|
ive got all sierra book spec running gear its only the engine and box with a adapted prop from the mx5 im planing on using ive already picked up the joints from eds motorsport hes only a few streets from me and really cheap he has a ebay shop as well worth a look for anyone after those bits and more
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
