![]() |
|
#1
|
||||
|
||||
![]() It's fine to have a filler attatched directly to the tank, also a cover at the top of the tub, just don't box it out or fit a floor (diffuser) so it can't be used as storage.
Obviously the cap must comply with current iva regs, being teathered or having a non removable key |
#2
|
||||
|
||||
![]() Sounds good, thanks guys!
|
#3
|
|||
|
|||
![]() The only issue is if it's sealed in, as a leak in the tank or in the cap could cause vapour to collect.
|
#4
|
||||
|
||||
![]() While were in the subject, how about
Quote:
I think its fine but am I being paranoid thinking I should re-work the lock to make the key only removable in locked position to be on the safe side? Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024 |
#5
|
|||
|
|||
![]() Quote:
As I read it, I think it being tethered would be fine, but I can see how it could be intepreted differently. |
#6
|
|||
|
|||
![]() its simple
if you can lock or not you must tether the cap UNLESS your fuel cap will not let you remove the key unless you re-lock it its simply there to stop you driving off from a petrol stn with no cap and have nothing to refit i have no lock at all just a bit of bath plug chain iva passed ![]() Last edited by baz-r : 2nd July 2013 at 09:28 PM. |
#7
|
||||
|
||||
![]() Quote:
Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024 |
![]() |
Thread Tools | |
Display Modes | |
|
|