Another build thread - Haynes Forums

skov Another build thread 6th February 2011, 10:49 AM

K4KEV Welcome to the forum... 6th February 2011, 11:17 AM

twinturbo Good luck, I have a 1 1/2... 6th February 2011, 11:32 AM

shh120m You wouldnt happen to have a... 6th February 2011, 03:25 PM

CaptainCrash1971 Hi Skov, welcome to the... 6th February 2011, 06:42 PM

twinturbo I have 2 , but they are V6... 6th February 2011, 06:45 PM

skov First few bits tacked into... 6th February 2011, 09:21 PM

Bonzo Nice to see that you have... 7th February 2011, 10:28 AM

skov Yep, it certainly did feel... 7th February 2011, 01:24 PM

Guest Bugger the car that TY80... 7th February 2011, 04:53 PM

skov A little more progress today... 8th February 2011, 09:00 PM

skov Collected an MX5 diff,... 9th February 2011, 09:39 PM

JakeH looking good! iv been... 9th February 2011, 09:49 PM

leroybrown911 TY80, class brings back... 9th February 2011, 11:25 PM

skov Nice to see the TY is... 10th February 2011, 08:42 PM

Aussie_Haynes_MX5 Premature? I had my build... 11th February 2011, 08:24 AM

spud69 Did you have a Tinney in your... 11th February 2011, 09:39 AM

Guest Blimey 99p that's a... 11th February 2011, 10:08 AM

skov I was quite surprised about... 11th February 2011, 10:41 AM

Deanno I've got the TS100 it was my... 11th February 2011, 12:32 PM

skov Met Headshot off the forum... 11th February 2011, 09:51 PM

HandyAndy Wow, looking great skov, that... 16th February 2011, 01:38 PM

skov Thanks Andy :D I have to... 16th February 2011, 01:54 PM

HandyAndy :cool: I must agree, your... 16th February 2011, 04:44 PM

spud69 :D Think your phone is... 16th February 2011, 04:48 PM

HandyAndy somebody phoned me whilst I... 16th February 2011, 05:00 PM

skov Managed to grab some garage... 17th February 2011, 09:22 PM

HandyAndy :cool: Nice work there... 17th February 2011, 10:26 PM

skov Had a couple of hours to... 24th February 2011, 09:55 PM

will_08 Cool whats in it? and whats... 24th February 2011, 10:14 PM

skov It's one of... 24th February 2011, 10:22 PM

will_08 Cheers Skov, i trawled the... 25th February 2011, 10:23 AM

skov Not much to report. Just... 4th March 2011, 09:34 PM

Spikehaus Your seat look no wider than... 4th March 2011, 10:05 PM

skov Thanks for the well... 6th March 2011, 08:19 AM

alga Sure they fit, you just need... 6th March 2011, 08:40 PM

skov Fair point Alga, I suppose... 10th March 2011, 01:21 PM

skov Just finished tacking the... 16th March 2011, 09:30 PM

twinturbo I tried for ages to find a... 16th March 2011, 09:40 PM

skov Funily enough I was looking... 16th March 2011, 10:27 PM

twinturbo I did use the KPD runners,... 16th March 2011, 10:49 PM

skov Any chance you could measure... 17th March 2011, 08:22 AM

twinturbo Will have a look for you... 17th March 2011, 12:42 PM

skov I picked up my donor today, a... 23rd March 2011, 08:04 PM

james3004 Looks like your getting on... 23rd March 2011, 08:41 PM

CTWV50 I'll be watching this thread... 30th March 2011, 10:24 PM

skov My gas wasn't cheap... Think... 31st March 2011, 07:38 AM

spud69 Try Energas if you have a... 31st March 2011, 09:28 AM

CTWV50 Just phoned a local supplier... 31st March 2011, 11:02 AM

CTWV50 A local company are doing me... 8th April 2011, 04:11 PM

K4KEV the little plastic blocks... 8th April 2011, 04:18 PM

CTWV50 Ahh thanks 8th April 2011, 04:43 PM

skov I got a bag of 100 of those... 8th April 2011, 10:31 PM

skov Just got a cheque for £68.33... 22nd April 2011, 02:17 PM

skov After a bit of a delay I... 27th April 2011, 10:04 PM

twinturbo Always good to have the... 27th April 2011, 10:23 PM

CTWV50 Oooo progress, I'm so... 28th April 2011, 12:09 AM

skov Not all of it yet, but a fair... 28th April 2011, 07:17 AM

CTWV50 Right I'll be listing mine... 28th April 2011, 03:53 PM

skov Noooo, I don't need any more... 28th April 2011, 07:10 PM

skov Well I didn't make it to... 2nd May 2011, 09:50 PM

james3004 looking good john:) 3rd May 2011, 09:27 AM

skov Thanks James :cool: Not... 9th May 2011, 09:12 PM

CTWV50 Same here but I have a little... 13th May 2011, 07:35 PM

skov Just a tad - I'm sure you... 14th May 2011, 02:23 PM

skov Well, I've not had the most... 30th May 2011, 04:21 PM

skov A new steering wheel arrived... 31st May 2011, 11:20 AM

CTWV50 I must of put about 60 hrs... 31st May 2011, 10:54 PM

skov My donor had an immobiliser... 31st May 2011, 11:12 PM

CTWV50 Yes I've eliminated the... 1st June 2011, 12:42 PM

skov More goodies arrived in the... 2nd June 2011, 02:04 PM

skov This cluster arrived from... 11th June 2011, 10:17 PM

ginger nutter that is goin to look great I... 11th June 2011, 11:38 PM

MarkB Clever stuff, I'm always... 12th June 2011, 09:41 AM

twinturbo So what do you use for the... 12th June 2011, 10:45 AM

skov Thanks guys. To be honest my... 12th June 2011, 11:45 AM

CTWV50 Genius!:cool: 12th June 2011, 02:56 PM

CTWV50 Thought about changing my... 12th June 2011, 03:01 PM

skov Yeah, the Mk1 speedo is... 12th June 2011, 04:00 PM

MarkB Please excuse my ignorance... 12th June 2011, 03:44 PM

Andy_B its a doofer that allows... 12th June 2011, 03:50 PM

CTWV50 Modern cars use a network... 12th June 2011, 04:08 PM

twinturbo CAN "Controler Area... 12th June 2011, 04:31 PM

skov Yep what he said :cool: I'd... 12th June 2011, 05:21 PM

skov I replaced the liner in my... 14th June 2011, 09:10 PM

CTWV50 Just ordered a teflon one off... 16th June 2011, 01:01 PM

skov It's well worth changing. ... 16th June 2011, 01:53 PM

CTWV50 Ahh bugger I've contacted the... 16th June 2011, 02:55 PM

skov My thoughts exactly on the... 16th June 2011, 04:14 PM

CTWV50 Yeah it's wierd on my 95 mx5... 16th June 2011, 05:10 PM

skov I'm not sure how the mini... 16th June 2011, 08:01 PM

skov That's enough of electrickery... 2nd July 2011, 11:15 PM

skov Another... 2nd July 2011, 11:17 PM

CTWV50 I think I won't bother with... 3rd July 2011, 09:24 AM

skov More progress tonight. I've... 5th July 2011, 09:45 PM

CTWV50 Looks good where did you get... 5th July 2011, 11:57 PM

MarkB Skov, The rhs you have got to... 6th July 2011, 09:54 AM

skov Thanks Mark, didn't think of... 6th July 2011, 06:19 PM

AshG skov i cant belevie you... 6th July 2011, 10:24 PM

AshG forgot to mention your... 6th July 2011, 10:35 PM

skov To be honest, I was getting... 6th July 2011, 10:47 PM

CTWV50 Build it as it is for the IVA... 7th July 2011, 09:16 AM

AshG go above tr8 by putting the... 7th July 2011, 08:49 PM

skov I think that's my current... 7th July 2011, 09:26 PM

skov I popped out to the garage... 8th July 2011, 01:22 PM

CTWV50 Bloody Hell John!!!!:D 8th July 2011, 06:17 PM

CTWV50 Is that the engines installed... 10th July 2011, 12:08 PM

skov No, it's just sitting rougly... 10th July 2011, 02:44 PM

skov Time for a quick... 21st July 2011, 08:05 AM

CTWV50 Looks really good, my mind is... 21st July 2011, 02:56 PM

skov Yep, I've got the sump flat... 21st July 2011, 05:11 PM

BORNXenon If there is any clearance... 22nd July 2011, 08:44 AM

skov Good point! In fact there's... 22nd July 2011, 09:13 AM

sven8t4 Ooooooooh Good Plan..... I... 22nd July 2011, 07:06 PM

twinturbo Eaton M45, I used to have... 22nd July 2011, 07:18 PM

skov Stop planting ideas into my... 23rd July 2011, 07:36 AM

robo Or an extra 4 cylinders. Bob 23rd July 2011, 08:18 AM

skov Thought I'd have a go at... 25th July 2011, 01:37 PM

CTWV50 I have no idea!:) 25th July 2011, 02:06 PM

sven8t4 looks good to me ;o) 26th July 2011, 04:47 PM

skov Woo hoo - Saturn have just... 29th July 2011, 06:52 PM

CTWV50 Oh yeah! Oh yeah! So happy! :D 29th July 2011, 06:53 PM

poshguy can you link to saturns build... 30th July 2011, 09:25 PM

PorkChop It's due to be posted up on... 30th July 2011, 09:32 PM

skov Have at this thread for... 30th July 2011, 10:00 PM

skov I've been suffering from a... 30th July 2011, 11:46 PM

skov Some more pics (damn the 4... 30th July 2011, 11:47 PM

skov And Skov said, Let there be... 21st August 2011, 10:21 PM

CTWV50 It's always nice to be able... 22nd August 2011, 10:14 PM

skov I spotted one of those in... 23rd August 2011, 01:40 PM

skov Got my VIN plate from AdrianH... 23rd August 2011, 01:48 PM

sven8t4 without sounding daft does... 23rd August 2011, 06:02 PM

Bonzo It's my best guess that the... 23rd August 2011, 06:20 PM

sven8t4 Good enough for me lol 23rd August 2011, 06:23 PM

SeriesLandy AshG reconed it is sad awkard... 23rd August 2011, 08:26 PM

Bonzo :D :D :D Could well be... 23rd August 2011, 09:50 PM

skov The VIN plate kindly provided... 29th August 2011, 01:24 PM

poshguy Looking good 29th August 2011, 01:51 PM

skov A box of goodies arrived from... 1st September 2011, 10:04 AM

skov Had a bit of a play with my... 2nd September 2011, 01:45 PM

poshguy looking good mate 2nd September 2011, 05:22 PM

skov Welding Complete! 6th September 2011, 11:45 PM

HandyAndy Nice one Skov :cool: its a... 7th September 2011, 10:38 AM

skov Yep, away goes the MIG, and... 7th September 2011, 11:16 AM

CTWV50 Well done John you're really... 7th September 2011, 11:56 AM

skov Don't worry Chris, I'll be up... 7th September 2011, 01:00 PM

sven8t4 Hey Skov, did you buy or... 21st September 2011, 07:16 PM

twinturbo Best bet is to go to Dave at... 21st September 2011, 08:32 PM

skov I think I bought them from... 21st September 2011, 08:43 PM

skov I've just reached a major... 2nd October 2011, 10:05 AM

james3004 looking good John, It'll soon... 2nd October 2011, 11:03 AM

twinturbo Good luck. TT 2nd October 2011, 11:09 AM

skov Thanks James/TT. In theory... 2nd October 2011, 12:29 PM

robo OMG Dont slam any doors:) :)... 2nd October 2011, 12:45 PM

HandyAndy Chassis is looking great John... 2nd October 2011, 02:36 PM

TheArf Looking good, hope all goes... 2nd October 2011, 03:28 PM

skov I'd need more than a 3... 2nd October 2011, 03:48 PM

skov I spent ages trying to find... 4th October 2011, 10:37 PM

twinturbo I would be interested in a... 4th October 2011, 10:41 PM

HandyAndy Nice Find 4th October 2011, 10:47 PM

skov Thanks Handy, not quite in... 4th October 2011, 11:00 PM

skov Here's the mounting info for... 4th October 2011, 11:40 PM

robo That clips the dogs danglers.... 5th October 2011, 07:45 AM

eSteve Chassis looking good. Clips?... 5th October 2011, 07:58 AM

twinturbo I have some ally angel to act... 5th October 2011, 08:51 AM

skov I've got some 30mm x 3mm ally... 6th October 2011, 10:42 PM

skov New Arrival 16th October 2011, 01:48 PM

rdodger Congratulations! :D 16th October 2011, 01:57 PM

skov Thanks Rog! Looks like... 16th October 2011, 07:27 PM

robo You wish:p :p More like two... 16th October 2011, 11:04 PM

rapidtornado congrats on the new arrival,... 16th October 2011, 11:10 PM

james3004 Congrats John! :D 17th October 2011, 05:06 PM

skov Thanks all :D 17th October 2011, 09:36 PM

HandyAndy Congratulations John , all... 19th October 2011, 01:08 PM

K4KEV Oooops John forgot to... 19th October 2011, 02:04 PM

CTWV50 Ahaha! Now I can catch up!... 19th October 2011, 02:39 PM

skov Thank Handy, Kev, and... 19th October 2011, 03:03 PM

CTWV50 It's coming along slowly, I... 19th October 2011, 05:07 PM

poshguy Congrats on the new addition... 20th October 2011, 04:44 PM

skov Thanks posh! 28th October 2011, 09:20 AM

skov My bonnet and nose cone had... 28th October 2011, 09:29 AM

adrianreeve Can you not fit the 1.8 inlet... 28th October 2011, 09:50 AM

skov Sadly not - the 1.8 isn't... 28th October 2011, 09:58 AM

spud69 Hi Skov, That's a shame with... 28th October 2011, 10:07 AM

Big Vern When changing MX-5 intakes... 28th October 2011, 10:13 AM

CTWV50 Oh dear! Can you take a... 28th October 2011, 03:51 PM

skov The 1.6 engine is slightly... 28th October 2011, 04:32 PM

CTWV50 Just been trying to compare... 28th October 2011, 04:56 PM

spud69 The normal scenario with car... 28th October 2011, 05:19 PM

skov I was hoping to avoid... 28th October 2011, 10:01 PM

MarkB Looking at the pictures you... 29th October 2011, 08:56 PM

twinturbo Could you make up an adapter... 30th October 2011, 08:11 AM

Davidbolam why don't you do an engine... 30th October 2011, 08:57 PM

skov I did think about swapping... 30th October 2011, 09:59 PM

Davidbolam Sounds like a good idea. Can... 30th October 2011, 10:04 PM

CTWV50 Well done John!:) 31st October 2011, 10:38 AM

MarkB The Vodou plugs were made so... 31st October 2011, 09:34 PM

Davidbolam Any further news on when the... 31st October 2011, 10:50 PM

skov Bonnet now... 1st November 2011, 01:07 PM

Bonzo Looking good Skov 1st November 2011, 01:39 PM

spud69 That's nice to see Skov, well... 1st November 2011, 01:41 PM

CTWV50 Well done John I knew you'd... 1st November 2011, 03:06 PM

skov Got to agree with the gearbox... 1st November 2011, 10:13 PM

CTWV50 Well if you take a... 1st November 2011, 10:47 PM

skov I've added some pics with... 2nd November 2011, 02:51 PM

CTWV50 Thanks John but I just get... 2nd November 2011, 03:32 PM

skov Now public! 2nd November 2011, 03:58 PM

CTWV50 Cheers Mate that's fantastic.... 2nd November 2011, 05:14 PM

skov No problem Chris. I think... 2nd November 2011, 05:41 PM

CTWV50 Halfords matt black for... 2nd November 2011, 08:10 PM

skov Hammerite Smooth Black for... 2nd November 2011, 08:24 PM

skov Just finished fitting my... 6th November 2011, 11:14 PM

robo Cellulose thinners if your... 6th November 2011, 11:17 PM

skov Bu99er, looks like I'll be... 7th November 2011, 07:06 AM

skov Tank by K4KEV turned up today... 9th November 2011, 10:11 PM

K4KEV I see what you mean about it... 9th November 2011, 10:58 PM

CTWV50 Are you making any more of... 10th November 2011, 11:54 AM

Johno Looking Good 10th November 2011, 08:26 PM

skov Should hold about 7.5 gallons... 10th November 2011, 08:44 PM

Johno Thanks for the help 21st November 2011, 07:22 PM

skov Hi Johno and co, Thanks for... 21st November 2011, 09:59 PM

Johno Sump mod... 5th December 2011, 11:33 AM

skov Thanks for the link Johno -... 18th December 2011, 12:09 PM

skov This week I have mostly been... 18th December 2011, 12:11 PM

wylliezx9r One thing I've noticed is the... 18th December 2011, 02:16 PM

skov You had me worried there... 19th December 2011, 11:43 PM

skov Well it's been a year and a... 2nd January 2012, 03:21 PM

skov Johno was complaining I... 17th January 2012, 10:00 PM

skov Seat back, tunnel top, and... 27th January 2012, 09:53 PM

HandyAndy Thats looking very nice... 27th January 2012, 10:21 PM

james3004 looking good John, You're... 28th January 2012, 09:25 AM

Johno Very nice indeed....:) Keep... 29th January 2012, 05:34 PM

Gear Monkey Looking good! We'll have to... 29th January 2012, 07:42 PM

skov Thanks guys :) It's starting... 29th January 2012, 09:53 PM

skov Well, it nearly killed me,... 2nd February 2012, 10:16 PM

skov Starting to look like a car... 3rd February 2012, 10:52 PM

james3004 Looks Great John! If you... 4th February 2012, 10:46 AM

skov Bugger, didn't think of that!... 4th February 2012, 11:09 AM

skov No progress on the car this... 5th February 2012, 02:51 PM

tkpm Whats Snow? :rolleyes: Terry 5th February 2012, 03:52 PM

skov I take it you haven't been... 5th February 2012, 04:09 PM

michael92 haha! awesome! looks like the... 5th February 2012, 04:17 PM

tkpm The sun is shining, the dog... 5th February 2012, 04:21 PM

stew haha, brilliant john. :)... 5th February 2012, 05:39 PM

Johno Car looking sweet John, I... 5th February 2012, 05:52 PM

Davidbolam Nice to see the build... 5th February 2012, 09:52 PM

skov Haha, it does look a bit... 6th February 2012, 05:35 AM

skov My lovely shiny protechs... 7th February 2012, 01:17 PM

skov I'm now officially rolling :D... 8th February 2012, 09:29 PM

HandyAndy Looking great :cool: Nice... 11th February 2012, 03:20 PM

skov I certainly did! Though to be... 11th February 2012, 04:23 PM

skov Got my Battery today. A... 13th February 2012, 11:20 AM

mark Fitted the same to my car... 13th February 2012, 12:02 PM

skov Hi Mark, that's good to know... 13th February 2012, 01:55 PM

james3004 Where did you get the battery... 13th February 2012, 03:13 PM

skov Hi James, I got it off ebay... 13th February 2012, 03:52 PM

andysredmini Hi Skov. Do you mind me... 15th February 2012, 01:48 PM

skov Hi Andy, I'm pretty sure I... 15th February 2012, 02:28 PM

andysredmini Thanks Skov. You were correct... 15th February 2012, 02:53 PM

skov Didn't do too much on the... 21st February 2012, 06:48 AM

stew looks good john. :) gonna be... 21st February 2012, 07:43 PM

skov Thanks Stew :) Hope you're... 21st February 2012, 07:58 PM

skov Finally got around to... 6th March 2012, 11:56 PM

CTWV50 How much were the bushes and... 7th March 2012, 12:42 PM

skov Glad to see you've come out... 7th March 2012, 01:00 PM

CTWV50 Yes it's warmer now so I... 7th March 2012, 02:44 PM

skov For the bushes I sent them a... 7th March 2012, 03:14 PM

CTWV50 You are "THE MAN" !... 7th March 2012, 03:40 PM

skov Yep, you've got some catching... 9th March 2012, 01:23 PM

HandyAndy :D I remember that scenario... 9th March 2012, 02:32 PM

skov That position sounds... 9th March 2012, 03:31 PM

Davidbolam Hi Skov. When you used the... 9th March 2012, 10:01 PM

skov Hi David, I used the existing... 9th March 2012, 11:40 PM

Johno Good progress, Looking good... 11th March 2012, 07:29 PM

Eternal Been searching for... 18th March 2012, 07:55 PM

skov Manufacturer: Jetpress Part#... 18th March 2012, 09:28 PM

CTWV50 Can you do me a favour now... 19th March 2012, 02:15 PM

skov Almost finished??? I... 20th March 2012, 08:52 AM

skov No progress to report, as... 8th April 2012, 09:21 AM

CTWV50 I wonder what you were up to.... 9th April 2012, 08:22 AM

skov Yeah, it was great to see it... 10th April 2012, 08:58 AM

CTWV50 :-)) What's with all the new... 10th April 2012, 10:07 AM

skov I felt the MX5 wiring was a... 10th April 2012, 11:13 AM

CTWV50 Ahh I see.:) 10th April 2012, 10:57 PM

skov Here's a close... 11th April 2012, 09:06 AM

skov Starting to find some time to... 17th April 2012, 09:08 PM

twinturbo nice work. 17th April 2012, 09:11 PM

Davidbolam Hi Skov. Please can you... 17th April 2012, 09:38 PM

skov Thanks TT. I'm quite happy... 17th April 2012, 11:01 PM

Davidbolam thanks skov - time for some... 18th April 2012, 09:28 PM

CTWV50 I see you've decided to use... 20th April 2012, 09:41 PM

skov Hi Chris, my extensions came... 20th April 2012, 10:14 PM

CTWV50 Oh right, I didn't know he... 20th April 2012, 10:48 PM

skov Don't think I'm quite ready... 21st April 2012, 08:39 AM

skov Made a start on the wiring... 25th April 2012, 01:50 PM

CTWV50 Looks good what have you... 25th April 2012, 02:11 PM

skov I covered it all in... 25th April 2012, 04:53 PM

CTWV50 I may do that myself!:D 25th April 2012, 04:56 PM

Johno Hi John, Looking good:cool:... 25th April 2012, 08:58 PM

HandyAndy Looks very tidy indeed :cool:... 25th April 2012, 09:40 PM

skov Maybe if you ignore the... 28th April 2012, 10:02 AM

skov Still slowly chipping away at... 1st May 2012, 11:20 AM

CTWV50 Oh mounted on it's side! What... 1st May 2012, 11:49 AM

skov Not my idea I'm afraid! I'm... 1st May 2012, 01:16 PM

Davidbolam hi skov, i was looking at... 1st May 2012, 07:21 PM

Johno Hi, Correct me if I'm wrong... 1st May 2012, 07:53 PM

skov You beat me to it... 1st May 2012, 07:58 PM

Johno Hi Skov, Sorry about butting... 1st May 2012, 08:15 PM

skov No worries :) It is the same... 1st May 2012, 08:27 PM

Davidbolam what does the switch in the... 1st May 2012, 10:39 PM

skov It's an emissions / fuel... 1st May 2012, 11:31 PM

motomaniac Skov, i would think there'd... 2nd May 2012, 09:58 AM

Johno Hi John, Looking good as... 7th May 2012, 08:59 PM

SeriesLandy Ash said he has had 3 fail... 7th May 2012, 10:07 PM

Johno So is there a better quality... 9th May 2012, 09:02 PM

robo I suppose you would lose a... 9th May 2012, 09:40 PM

skov I decided to separate the... 17th May 2012, 01:21 PM

chrisponter I was thinking of replacing... 17th May 2012, 02:03 PM

CTWV50 Sh*t:eek: , cracks!! How many... 17th May 2012, 03:36 PM

skov Looks good - I could quite... 18th May 2012, 11:17 AM

CTWV50 Nice one. So easy to get... 18th May 2012, 12:02 PM

BORNXenon Like womens underwear. The... 18th May 2012, 01:11 PM

skov https://lh6.googleusercontent.... 18th May 2012, 08:55 PM

K4KEV Hi John.....looks like it has... 19th May 2012, 12:45 AM

Tatey I have to say I wouldn't want... 19th May 2012, 07:51 AM

Davidbolam Reduction valve 5th June 2012, 03:16 PM

skov No idea what it is I'm... 5th June 2012, 03:50 PM

skov I think it must be time for... 22nd June 2012, 11:19 PM

twinturbo Good effort, just need to get... 23rd June 2012, 07:53 AM

skov Thanks TT. Hopefully won't... 23rd June 2012, 08:52 AM

alga Wow, your spaghetti looks... 23rd June 2012, 12:55 PM

Davidbolam Looking really good skov. I... 23rd June 2012, 07:57 PM

skov Thanks David. If you mean... 23rd June 2012, 10:15 PM

Davidbolam Are you not using the in tank... 23rd June 2012, 10:38 PM

skov No, but I wish I had now! 23rd June 2012, 11:14 PM

Johno Nice to get back in the swing... 26th June 2012, 06:55 PM

skov Might look good if the colour... 29th June 2012, 01:28 PM

CTWV50 I think it'll be all right... 30th June 2012, 02:45 AM

skov Glad to hear it Chris :D... 30th June 2012, 07:15 AM

CTWV50 So I see! Just had a nose... 1st July 2012, 12:21 PM

skov Time for an update! Just... 1st July 2012, 10:47 PM

Johno Hi John, You'll be running... 2nd July 2012, 08:45 PM

skov I can't see me ever runing... 2nd July 2012, 09:11 PM

twinturbo I have one of those pumps... 3rd July 2012, 08:04 AM

Davidbolam Accelerator Cable 3rd July 2012, 09:26 AM

skov I didn't nick it, honest :)... 3rd July 2012, 11:16 AM

skov This evening I have mostly... 3rd July 2012, 11:27 PM

skov ...the routing of the top... 3rd July 2012, 11:27 PM

Johno You've been a busy bunny... 6th July 2012, 08:55 PM

PorkChop It's a CDA airbox Johno. The... 6th July 2012, 09:48 PM

twinturbo Having water in makes a whole... 7th July 2012, 08:11 AM

CTWV50 Nice Job John, I've been... 7th July 2012, 10:36 AM

skov Thanks guys. The airbox is a... 9th July 2012, 07:00 AM

deezee Just a quick observation, but... 9th July 2012, 12:16 PM

skov Yeah, I know it's going to be... 9th July 2012, 02:19 PM

skov Hi David, just finished my... 10th July 2012, 09:36 PM

Davidbolam Thanks for the update re the... 10th July 2012, 10:50 PM

skov Haven't done a massive amount... 4th August 2012, 07:24 AM

Davidbolam Don't forget the video!! The... 4th August 2012, 11:58 AM

skov Don't worry, I won't forget... 4th August 2012, 12:47 PM

Davidbolam Not yet. The fuel pipes that... 4th August 2012, 08:13 PM

skov She Lives!!!! 4th August 2012, 08:19 PM

Davidbolam congratulations - it wont be... 5th August 2012, 07:25 PM

Johno Well done John.....:D I bet... 5th August 2012, 08:12 PM

skov Thanks guys, I did indeed... 6th August 2012, 11:11 PM

Davidbolam John, On the fuel rail which... 8th August 2012, 12:02 AM

skov Hi David, That's right - the... 8th August 2012, 06:52 AM

skov Shiny! 8th August 2012, 09:34 AM

Johno Well that looks very nice... 8th August 2012, 08:31 PM

skov It's a Simmi Performace... 8th August 2012, 09:06 PM

motomaniac bloody hell, simmi, hes just... 8th August 2012, 09:28 PM

Davidbolam The exhaust looks good and it... 8th August 2012, 10:46 PM

motomaniac hes just outside if he hasnt... 9th August 2012, 01:04 AM

skov My shortened propshaft turned... 21st August 2012, 09:08 AM

K4KEV jeeeez....that looks awefully... 21st August 2012, 11:21 AM

CTWV50 So when is the first drive? :) 21st August 2012, 11:28 AM

CTWV50 Well done john, made me smile... 21st August 2012, 11:33 AM

skov You had me worried all... 21st August 2012, 09:06 PM

K4KEV just realized John ...the... 22nd August 2012, 12:51 AM

CTWV50 It's that time of year again... 22nd August 2012, 01:20 PM

skov I know the feeling, my build... 23rd August 2012, 08:37 AM

skov Had a successful bank holiday... 27th August 2012, 08:37 PM

ayjay Well done;) Did you use the... 27th August 2012, 08:55 PM

twinturbo Must be a very long time sine... 27th August 2012, 09:08 PM

Davidbolam Well done. I must get out in... 27th August 2012, 09:13 PM

skov Thanks Guys :D Here's some... 27th August 2012, 11:04 PM

Johno Hey....:D First turn of the... 29th August 2012, 08:27 PM

skov Hey Johno, I put it that far... 29th August 2012, 09:02 PM

Johno Hi John, I hate to be the... 2nd September 2012, 06:52 PM

skov Ha ha. I've been trying to... 2nd September 2012, 10:57 PM

skov Managed to get my brakes... 6th September 2012, 11:21 AM

Davidbolam Now I really have to go into... 6th September 2012, 01:49 PM

skov I'm not sure I want to post... 6th September 2012, 02:08 PM

vmax1974 When you do please make a few... 6th September 2012, 02:53 PM

Davidbolam How about 3 sets or publish... 6th September 2012, 10:13 PM

skov I aint running a production... 6th September 2012, 11:05 PM

deezee https://lh3.googleusercontent.... 7th September 2012, 08:55 AM

skov Hi Deezee, I did have my... 7th September 2012, 09:22 AM

skov Here's a pic of the NTS... 8th September 2012, 08:28 AM

CTWV50 Wow, well done John. Almost... 9th September 2012, 11:09 AM

skov Thanks Chris! I had to google... 10th September 2012, 06:40 AM

skov Not the most exciting... 11th September 2012, 01:16 PM

Davidbolam Hi skov any chance of a... 12th September 2012, 08:33 PM

alga Oooh, the straps look very... 12th September 2012, 11:54 PM

skov Thanks Alga! I was just going... 13th September 2012, 01:24 PM

skov That's my rear tub done! Made... 16th September 2012, 04:02 PM

Dualist Rear tub looks bloody good... 16th September 2012, 06:28 PM

voucht Look excellent Skov,... 16th September 2012, 06:35 PM

skov Thanks guys! To be fair it... 16th September 2012, 10:01 PM

Johno Hi John, Thats looking very... 20th September 2012, 08:54 PM

skov Haven't got a clue on the... 20th September 2012, 10:02 PM

skov One of the things I love... 23rd September 2012, 09:57 PM

robo FMB you will be knitting the... 23rd September 2012, 10:14 PM

skov Thanks Bob! Still not happy... 24th September 2012, 11:17 AM

CTWV50 Ahaha! My mum had one of... 5th October 2012, 01:28 PM

skov Thanks Chris! Had to man up... 7th October 2012, 09:24 PM

Davidbolam Looking good skov. How are... 7th October 2012, 09:37 PM

skov Thanks David. I've replaced... 7th October 2012, 09:46 PM

robo What Bradford?????? Are you... 7th October 2012, 09:46 PM

skov Oooh, that's a bit... 8th October 2012, 09:31 AM

robo Sorry I meant to say... 8th October 2012, 09:52 AM

skov They should meet IVA... 8th October 2012, 11:13 AM

Numplumb Hi skov just read your thread... 16th October 2012, 10:44 PM

skov You're too kind Mick! Are you... 17th October 2012, 09:15 AM

skov Hi David, Here's a slightly... 1st May 2012, 07:57 PM

will_08 Congratulations John, all the... 16th October 2011, 07:39 PM

vmax1974 Thats great news... 16th October 2011, 10:34 PM

twinturbo Excelent new, TT 16th October 2011, 10:44 PM

rdodger Good find! I will take a few... 4th October 2011, 10:46 PM

Numplumb Alterations 17th October 2012, 10:49 PM

skov Hi mate, that's right - the... 18th October 2012, 12:07 AM

skov Thought I'd whip the sewing... 18th October 2012, 09:41 PM

robo Skov that cover is the... 18th October 2012, 10:22 PM

Davidbolam Hi skov are you using a polo... 23rd October 2012, 10:17 PM

skov Hi David, Radiator is VW... 24th October 2012, 06:54 AM

Davidbolam Thanks. Does your expansion... 24th October 2012, 11:18 PM

alga All VAG bottles I've seen... 25th October 2012, 12:46 AM

skov Mines the same bottle. I've... 25th October 2012, 12:58 PM

skov I decided to get that top... 25th October 2012, 11:56 PM

Johno That's all looking neat and... 26th October 2012, 07:23 PM

skov I've been playing with the... 3rd February 2013, 11:14 AM

Dualist I like it, especially as I... 3rd February 2013, 05:24 PM

K4KEV You could earn some dollar... 3rd February 2013, 06:02 PM

flyerncle New Lucra on the drawing... 3rd February 2013, 09:28 PM

Davidbolam That looks really good. Very... 3rd February 2013, 11:10 PM

skov Thanks guys! I think I might... 4th February 2013, 07:41 AM

skov Spent the last couple of... 17th February 2013, 04:11 PM

Johno Hi John, Blimey the're some... 17th February 2013, 08:14 PM

minicountryman1961 when I bought my headlamps, I... 17th February 2013, 10:35 PM

skov They're not that big... 17th February 2013, 11:43 PM

Stot Not sure they would IVA would... 18th February 2013, 07:36 AM

skov The stalks are only needed to... 18th February 2013, 09:08 AM

robo Davey fitted some all in one... 18th February 2013, 09:34 AM

skov That's my mirrors fitted -... 18th February 2013, 09:18 PM

CTWV50 Stupid question I suppose but... 27th February 2013, 05:38 PM

skov If you mean the copper lines... 27th February 2013, 09:21 PM

Davidbolam That's really useful as I was... 26th October 2012, 07:43 PM

skov No problem David! I'm... 27th October 2012, 06:58 AM

Davidbolam Skov I have just been... 5th November 2012, 12:03 AM

skov Hi David, No, I didn't use... 5th November 2012, 09:25 AM

skov That's my rear wings, rear... 18th November 2012, 10:22 AM

K4KEV Good progress John.....I was... 18th November 2012, 10:29 AM

CTWV50 Looking good John. Like the... 18th November 2012, 10:37 AM

skov Don't worry Kev, I'm still... 18th November 2012, 11:10 AM

robo That looks like a very nearly... 18th November 2012, 11:24 AM

stew looks great john! :) 18th November 2012, 11:55 AM

skov Think you might be right... 18th November 2012, 02:18 PM

stew not done anything since... 18th November 2012, 08:10 PM

twinturbo last thing i did was put on... 23rd November 2012, 07:15 AM

skov Well I've done bu99er all on... 22nd December 2012, 10:30 PM

will_08 The progress you've made, you... 22nd December 2012, 10:54 PM

Davidbolam Engine Age 27th December 2012, 02:29 PM

skov Had a great xmas thanks... 27th December 2012, 02:47 PM

robo So first she buys you a... 28th December 2012, 11:56 AM

skov Happy new year all! Today's... 1st January 2013, 11:54 AM

skov Got a call from work today to... 18th January 2013, 12:40 PM

skov Just managed to finish my... 21st January 2013, 11:25 AM

Davidbolam I think it looks really good.... 21st January 2013, 11:42 AM

skov I'm not convinced, but thanks... 21st January 2013, 12:18 PM

skov Rear wings are now bolted in... 21st January 2013, 12:18 PM

twinturbo Nice to see you making... 21st January 2013, 12:39 PM

K4KEV By gum John.....you haven't... 21st January 2013, 12:55 PM

skov The strange thing is it... 21st January 2013, 03:28 PM

skov Oh, and another thing I've... 22nd January 2013, 09:18 PM

Johno Hi John, She's all coming... 24th January 2013, 07:42 PM

skov Ah ha, I was bored at... 24th January 2013, 10:25 PM

twinturbo Don't loose it ;) TT 25th January 2013, 12:11 PM

skov I won't lose it, not after... 25th January 2013, 01:31 PM

skov This evening I have mostly... 26th January 2013, 08:22 PM

Davidbolam Drill some holes in the... 26th January 2013, 10:04 PM

skov That's my side repeaters... 30th January 2013, 02:03 PM

skov Got my proof of donor/engine... 30th January 2013, 11:12 PM

Stot Hi, Would I be right in... 31st January 2013, 09:25 AM

skov Hi Stot, I've done a bit of... 31st January 2013, 01:18 PM

Stot Yeah I guess thats unlikely... 31st January 2013, 05:17 PM

CTWV50 I see you have made a second... 6th March 2013, 10:39 AM

skov Sorry Chris, the red one is... 6th March 2013, 11:10 AM

skov Speaking of interior panels,... 9th March 2013, 09:17 PM

CTWV50 Looks ace? What seats are... 9th March 2013, 09:46 PM

alga Aww, very stylish. 9th March 2013, 09:56 PM

Davidbolam That looks good. It looks... 9th March 2013, 10:03 PM

skov No, I got peed off trying to... 9th March 2013, 10:03 PM

CTWV50 Yes I'm reaching that point... 9th March 2013, 10:28 PM

skov The bolt holes are roughly... 10th March 2013, 09:18 AM

Johno Well I must say that looks... 10th March 2013, 09:57 AM

skov Thanks Johno, I didn't find... 10th March 2013, 07:15 PM

K4KEV Those panels do look the dogs... 11th March 2013, 01:12 AM

flyerncle My old man was a tailor and... 11th March 2013, 05:15 PM

skov On the upside you wouldn't... 11th March 2013, 07:12 PM

Stot I love this stuff, might have... 11th March 2013, 08:01 PM

skov Damn, should have copyrighted... 11th March 2013, 09:40 PM

Davidbolam Handbrake cables 12th March 2013, 10:34 PM

skov Hi David, I haven't got a... 13th March 2013, 09:08 AM

skov More bl00dy wiring... (feels... 30th March 2013, 09:38 AM

CTWV50 Looks very neat. I just spent... 30th March 2013, 07:34 PM

skov That's pretty good going... 31st March 2013, 09:40 AM

CTWV50 It would of been good going... 31st March 2013, 07:49 PM

CTWV50 Oh and thanks for the heads... 31st March 2013, 07:52 PM

skov It seems to run fine without,... 31st March 2013, 08:05 PM

Davidbolam I was told that you can just... 1st April 2013, 06:01 PM

skov Yep, checked it with a... 1st April 2013, 08:42 PM

CTWV50 what are you using to read... 1st April 2013, 10:00 PM

skov Yep, just an LED. Very... 1st April 2013, 10:29 PM

CTWV50 Well done finishing the loom.... 1st April 2013, 11:36 PM

skov Thanks Chris. It certainly... 2nd April 2013, 10:11 AM

CTWV50 I did see that post and I... 2nd April 2013, 10:49 AM

alga A small correction: the... 2nd April 2013, 05:01 PM

skov That is the cutoff date, but... 2nd April 2013, 06:13 PM

skov Nearly done now :D... 3rd April 2013, 09:38 AM

Stot Exciting times. :D... 3rd April 2013, 11:21 AM

thailoz man thats looking sweet:) 3rd April 2013, 12:46 PM

CTWV50 Brilliant! Just in time for... 3rd April 2013, 11:28 PM

skov Thanks Chris. Think you must... 4th April 2013, 08:52 AM

K4KEV great work and progress... 4th April 2013, 10:16 AM

skov Cheers Kev. To be fair I... 4th April 2013, 08:10 PM

Johno Good going John...:) So how... 4th April 2013, 09:54 PM

skov Cheers Johno, we had a great... 13th April 2013, 08:16 AM

skov Finally made a start on the... 14th April 2013, 10:14 PM

CTWV50 How have you attached them at... 15th April 2013, 01:47 AM

skov Hey Chris, There's an M10... 15th April 2013, 09:07 AM

CTWV50 Cheers John I'll hold off.... 15th April 2013, 04:12 PM

skov Yes, I think so. 15th April 2013, 04:58 PM

skov That's the other wing stay... 17th April 2013, 02:04 PM

flyerncle One thing to be aware of with... 17th April 2013, 06:30 PM

skov Borrowed a sound meter from... 27th April 2013, 11:09 AM

CTWV50 Oops! Hahahaha. It is the... 28th April 2013, 10:13 AM

skov Haha, that thing certainly is... 28th April 2013, 12:34 PM

CTWV50 :D So you basically blocked... 29th April 2013, 01:35 PM

skov erm, more or less, yes :D... 29th April 2013, 04:12 PM

CTWV50 I don't think that's a fail... 29th April 2013, 05:08 PM

skov I'm not so sure... I suspect... 29th April 2013, 06:40 PM

CTWV50 But is it an immediate... 29th April 2013, 06:44 PM

skov It is if it's flying towards... 29th April 2013, 09:12 PM

CTWV50 I guess the point is they... 29th April 2013, 10:06 PM

skov I guess that makes sense if... 30th April 2013, 09:46 AM

CTWV50 Excellent. If it rains this... 30th April 2013, 09:49 AM

skov Not been a great day in the... 4th May 2013, 09:17 PM

CTWV50 I've got to find the oil leak... 4th May 2013, 10:38 PM

Davidbolam I think I've got a spare set... 4th May 2013, 10:45 PM

skov Hi David, Thanks for offer,... 4th May 2013, 11:06 PM

skov Arrghhh! I've got a coolant... 6th May 2013, 08:51 AM

alga You're supposed to polish the... 6th May 2013, 01:50 PM

skov Doh! :rolleyes: One step... 7th May 2013, 03:34 PM

CTWV50 I normally just tap the seal... 7th May 2013, 04:03 PM

skov I had a dig through my spares... 7th May 2013, 04:58 PM

Johno Hi John, You don't seem to be... 7th May 2013, 09:25 PM

skov Right, that's the cam seals... 19th May 2013, 12:02 AM

Davidbolam The car is looking great... 19th May 2013, 12:34 AM

skov Thanks David. I'm pretty... 19th May 2013, 08:33 AM

skov Ah ha, I think I may have... 19th May 2013, 11:49 AM

skov I've gone and blooming done... 20th May 2013, 01:33 PM

K4KEV Well done John......hope I am... 20th May 2013, 02:26 PM

CTWV50 Well done John! Hopefully... 21st May 2013, 09:43 PM

CTWV50 Just looking through your... 21st May 2013, 09:54 PM

skov Sadly they weren't quite a... 21st May 2013, 10:30 PM

CTWV50 Oh, bummer. :( 21st May 2013, 11:44 PM

skov VOSA just phoned to relieve... 22nd May 2013, 02:04 PM

skov Not much to report, but... 25th May 2013, 12:36 PM

deezee Build is looking good. Lets... 26th May 2013, 11:19 AM

skov Thanks Deezee, hopefully... 26th May 2013, 01:28 PM

skov I phoned VOSA today because... 28th May 2013, 11:15 AM

CTWV50 You'll have to start another... 5th June 2013, 06:14 PM

CTWV50 Looks really good John! :cool: 5th June 2013, 06:16 PM

skov Thanks Chris :) To be fair... 5th June 2013, 07:09 PM

K4KEV lol lol lol:D 5th June 2013, 07:29 PM

CTWV50 HAHAHAHA!!! 5th June 2013, 08:38 PM

Johno Hi John, I notice in your... 5th June 2013, 09:04 PM

skov Mind the gap... :rolleyes:... 5th June 2013, 09:52 PM

skov Come on VOSA pull your finger... 10th June 2013, 10:41 PM

skov Phoned VOSA today. ... 12th June 2013, 02:09 PM

CTWV50 OOoooo exciting!!:D 12th June 2013, 02:31 PM

skov Even more exciting - the test... 12th June 2013, 03:40 PM

K4KEV Don't waste those two weeks... 12th June 2013, 04:08 PM

skov I'm already sick of reading... 12th June 2013, 06:36 PM

Johno Well it's good you got your... 12th June 2013, 09:16 PM

K4KEV I think his wife had better... 12th June 2013, 10:08 PM

CTWV50 Great news, plenty of summer... 13th June 2013, 09:09 PM

skov The quotes so far have been... 13th June 2013, 09:40 PM

skov Just sorted my insurance out... 20th June 2013, 01:19 PM

CTWV50 So you plan on driving to the... 20th June 2013, 03:48 PM

Davidbolam you can drive to iva centre.... 20th June 2013, 03:55 PM

skov Yes, I'm that... 20th June 2013, 03:59 PM

skov It's covered under the... 20th June 2013, 04:12 PM

CTWV50 Wow! Better take a print out... 21st June 2013, 09:53 PM

skov I was pleasantly surprised,... 21st June 2013, 10:29 PM

CTWV50 More likely that you won't... 21st June 2013, 10:36 PM

skov I belive that would be zero... 23rd June 2013, 12:17 PM

CTWV50 Excited for you! :D Duck tape! 23rd June 2013, 01:57 PM

skov I don't think IVA man will be... 23rd June 2013, 07:13 PM

alga Zip ties then! 23rd June 2013, 10:14 PM

CTWV50 What time is your test?:) 25th June 2013, 12:27 AM

skov 8.00am :eek: 25th June 2013, 05:07 AM

CTWV50 You must be done by now!:) 25th June 2013, 02:55 PM

Nismo1982 Must be taking the long route... 25th June 2013, 03:15 PM

skov Only because I got lost :D 25th June 2013, 03:35 PM

skov Luckly I made it to the test... 25th June 2013, 03:36 PM

Davidbolam thats not too bad John. I am... 25th June 2013, 04:14 PM

K4KEV Al relatively easy to sort... 25th June 2013, 04:33 PM

skov No, I didn't bother sorting... 25th June 2013, 04:50 PM

CTWV50 A shame it was a fail but... 25th June 2013, 05:55 PM

skov It's certainly scary enough... 25th June 2013, 07:10 PM

CTWV50 Are you using the mx5 brake... 25th June 2013, 07:16 PM

skov No, I junked the MX5 one as I... 25th June 2013, 08:46 PM

CTWV50 Well I don't know much about... 25th June 2013, 10:42 PM

CTWV50 This any use to... 25th June 2013, 10:49 PM

Stot I'm going to fit one of these... 26th June 2013, 10:16 AM

CTWV50 Adjustable bias valves aren't... 26th June 2013, 10:18 AM

Stot This is a good point.... 26th June 2013, 10:35 AM

skov I really don't want to be... 26th June 2013, 01:07 PM

Stot I did a bit more research and... 26th June 2013, 01:15 PM

Johno Hi John, Sorry about the... 27th June 2013, 09:27 PM

skov It wasn't balls, it was... 27th June 2013, 10:58 PM

skov Fcuck it, I've took my Mondeo... 28th June 2013, 11:52 PM

Davidbolam Which universal joint are you... 29th June 2013, 05:04 PM

Stot I have the RD forged one too... 29th June 2013, 06:24 PM

Johno Hi John, So was the hand... 29th June 2013, 07:02 PM

skov I was using forged Rally... 30th June 2013, 09:45 AM

Johno Hi John, So what was it like... 30th June 2013, 06:57 PM

skov It's a bit early to say yet. ... 30th June 2013, 07:41 PM

Davidbolam Is the pressed Steel UJ the... 1st July 2013, 02:32 PM

skov Yes, the one I got off ebay... 1st July 2013, 03:29 PM

skov Arrrrgghhh! Fixed everything... 1st July 2013, 07:18 PM

CTWV50 Well Done! You don't hang... 1st July 2013, 11:31 PM

Davidbolam How was the brake balance... 1st July 2013, 11:56 PM

skov The rears are much stronger... 2nd July 2013, 09:08 AM

skov Passed my IVA re-test this... 4th July 2013, 01:17 PM

K4KEV Good timing for the nice... 4th July 2013, 01:19 PM

CTWV50 Well Done! And....relax! :) 4th July 2013, 01:23 PM

Davidbolam Can I check what bolts you... 4th July 2013, 10:32 PM

skov Thanks Chris and Kev! David,... 5th July 2013, 08:53 AM

CTWV50 I got a replacement uj (free)... 6th July 2013, 09:23 AM

skov Got my Reg number and tax... 8th July 2013, 01:43 PM

Stot Dang you beat me. :p :D... 8th July 2013, 02:02 PM

skov Only just! Have you got your... 8th July 2013, 02:16 PM

CTWV50 Hottest day if the year too!... 8th July 2013, 02:24 PM

skov Nope, J-reg :) 8th July 2013, 03:01 PM

CTWV50 How was it Legal Eagle? 8th July 2013, 08:56 PM

skov Fooooooooking AWESOME! 8th July 2013, 09:55 PM

Stot I think I will be slitting... 8th July 2013, 02:02 PM

CTWV50 I think I'll get the one off... 8th July 2013, 02:25 PM

CTWV50 Actually looking at the... 8th July 2013, 02:54 PM

CTWV50 Yep this worked for me!:D 8th July 2013, 08:55 PM

Stot Good news, ill give it a go... 9th July 2013, 07:56 AM

CTWV50 If you need any bits of... 11th July 2013, 03:53 PM

skov If you had a full set the... 12th July 2013, 01:10 PM

CTWV50 Nevermind, provisionally sold... 12th July 2013, 01:21 PM

skov Well done, didn't think... 12th July 2013, 02:18 PM

skov Speaking of commuting in the... 13th July 2013, 12:59 PM

Davidbolam It looks like it goes fast... 13th July 2013, 02:01 PM

SteveMX5 Not too bad for 8 quid I... 13th July 2013, 03:09 PM

Johno Wow looks like fun.......:D... 13th July 2013, 08:17 PM

CTWV50 Two things to say.... Looks... 13th July 2013, 03:09 PM

PorkChop Nice to see that the cars 55... 13th July 2013, 09:07 PM

skov She certainly feels nippy... 13th July 2013, 11:43 PM

skov My lovely shiny solid diff... 31st July 2013, 11:15 AM

skov No pic, but my repaired... 1st August 2013, 11:18 AM

CTWV50 Cracking! :D Excuse the... 1st August 2013, 11:22 AM

ayjay That vids quite good for a... 1st August 2013, 11:51 AM

james3004 Was good to see the finished... 1st August 2013, 01:16 PM

alga Ayjay, just search for 'md80... 1st August 2013, 03:31 PM

skov Cheers James! If only my... 2nd August 2013, 06:39 AM

skov You know when you've been... 2nd August 2013, 09:17 AM

jason 82 You know when you been... 2nd August 2013, 09:25 AM

PorkChop It was my pleasure John -... 2nd August 2013, 07:30 PM

skov No worries Dave. I've just... 3rd August 2013, 09:16 AM

CTWV50 That's annoying! 3rd August 2013, 02:30 PM

james3004 Very not good! 3rd August 2013, 02:55 PM

Johno John's right, it's a lot more... 3rd August 2013, 08:45 PM

skov Got hold of Northwest... 5th August 2013, 01:04 PM

Davidbolam Handbrake cables 11th August 2013, 03:47 PM

skov Don't lose heart David,... 11th August 2013, 05:43 PM

CTWV50 I know that feeling, I'm... 11th August 2013, 08:03 PM

twinturbo I am selling an engine and... 11th August 2013, 08:28 PM

Davidbolam I've been out in the garage... 11th August 2013, 08:50 PM

Stot On mine in the photo you can... 11th August 2013, 09:08 PM

skov Finally got my propshaft back... 13th August 2013, 09:02 PM

CTWV50 Great, lets us all know if it... 14th August 2013, 09:11 PM

twinturbo looks solid, certainly an... 15th August 2013, 07:52 AM

Dualist Looks good mate, I'll doing... 15th August 2013, 08:24 PM

skov Just had a quick blast. The... 16th August 2013, 09:19 PM

skov 250 miles on and the diff is... 23rd August 2013, 06:45 PM

CTWV50 Wow huge goggles! Must of... 23rd August 2013, 07:06 PM

skov Think it might be small head... 23rd August 2013, 07:41 PM

ayjay Looks like "The... 23rd August 2013, 09:13 PM

Johno Glad to hear the "Tango... 24th August 2013, 07:58 PM

skov Yes, I'm pretty sure it... 24th August 2013, 09:54 PM

skov My odometer passed 1000 miles... 28th August 2013, 07:20 PM

Johno That's good to hear:) You've... 31st August 2013, 09:54 AM

skov I'm currently running 400lbs... 31st August 2013, 10:31 AM

skov Ah ha, I found my old build... 10th January 2014, 09:47 PM

Davidbolam Supercharger or turbo... 10th January 2014, 09:50 PM

skov I've got a turbo, a spare... 10th January 2014, 10:05 PM

Davidbolam Sounds like a good plan. Have... 10th January 2014, 10:22 PM

CTWV50 Ooooh I'm getting all... 10th January 2014, 10:47 PM

loony I was always told that it's... 10th January 2014, 11:47 PM

PorkChop Eh? Both Ma5da (when it was... 11th January 2014, 01:06 AM

skov That's what I thought... 11th January 2014, 09:08 AM

Davidbolam Got the races mixed up. I... 11th January 2014, 09:37 AM

james3004 I would say 250bhp out of a... 11th January 2014, 10:47 PM

skov I would have thought so too,... 12th January 2014, 01:12 PM

james3004 Are to going to decompress... 12th January 2014, 01:41 PM

skov There's no need to decompress... 12th January 2014, 02:03 PM

james3004 You make it sound so easy;) :D 13th January 2014, 06:08 PM

skov Only because I've never done... 13th January 2014, 06:15 PM

james3004 :D how hard can it be!?!?? 13th January 2014, 06:39 PM

skov Harder than I thought - just... 13th January 2014, 09:44 PM

johnl63 https://www.youtube.com/watch?... 13th January 2014, 10:55 PM

CTWV50 That Turbo Manifold design... 15th January 2014, 10:09 PM

skov I had something very similar... 15th January 2014, 10:16 PM

CTWV50 What turbo have you got... 15th January 2014, 10:23 PM

skov I didn't say I couldn't make... 15th January 2014, 10:38 PM

CTWV50 That looks fine! There's... 15th January 2014, 10:46 PM

jason 82 Tidy job. That you tube video... 16th January 2014, 08:58 AM

flyerncle I smell brown trousers :p 17th January 2014, 03:08 PM

james3004 Have you not got the turbo... 17th January 2014, 07:06 PM

skov Erm sort of... but if I put... 17th January 2014, 10:58 PM

K4KEV its called... 18th January 2014, 11:59 AM

CTWV50 I nearly bought a TD04 this... 18th January 2014, 05:48 PM

skov There's no point resisting,... 21st January 2014, 10:18 PM

skov In other news, the turbo... 21st January 2014, 10:21 PM

james3004 You have been a busy boy this... 22nd January 2014, 10:45 AM

skov I suspect the rest of the... 22nd January 2014, 11:25 AM

james3004 Funny you should say that I... 22nd January 2014, 01:17 PM

skov Oh no! Apologies if it was... 23rd January 2014, 08:51 AM

twinturbo I used to have a load of... 23rd January 2014, 12:11 PM

CTWV50 Look at... 23rd January 2014, 06:44 PM

skov It was a bit touch and go at... 30th January 2014, 01:45 PM

CTWV50 Doing a proper job! Which... 30th January 2014, 06:42 PM

CTWV50 Doh. Nevermind. I have manful... 30th January 2014, 06:51 PM

skov Ha ha, I know the feeling... 2nd February 2014, 02:19 PM

skov Got my block back yesterday -... 6th February 2014, 01:18 PM

K4KEV crikey:eek: for not a lot... 6th February 2014, 02:16 PM

james3004 :eek: That's really not so... 6th February 2014, 05:07 PM

jason 82 That's going to be one quick... 7th February 2014, 08:04 AM

skov To be fair there is a bit... 7th February 2014, 11:19 AM

jason 82 I would get that turbo... 7th February 2014, 12:59 PM

K4KEV If you are planning a... 7th February 2014, 02:18 PM

flyerncle How hard can it be ? :eek:... 7th February 2014, 07:05 PM

K4KEV Dont know if this will be any... 12th February 2014, 11:09 AM

skov Thanks Kev - that is the sort... 12th February 2014, 12:59 PM

skov Mostly for Chris, who I know... 15th February 2014, 10:56 AM

CTWV50 Haha! You making your own... 16th February 2014, 07:15 PM

skov I wouldn't be too impressed... 17th February 2014, 09:03 AM

james3004 Have you got the engine... 17th February 2014, 01:23 PM

skov If only! Still waiting for... 17th February 2014, 01:41 PM

james3004 That's not so good! Will need... 17th February 2014, 03:13 PM

Stot Thats what it looked like to... 17th February 2014, 06:53 PM

skov No worries, just give me a... 17th February 2014, 07:28 PM

Stot That sounds cool, I can... 17th February 2014, 08:20 PM

CTWV50 I'd be up for that, I might... 17th February 2014, 08:46 PM

skov Excellent, I'll give you a... 17th February 2014, 11:47 PM

CTWV50 Oh, I have a B6GP! :( 18th February 2014, 12:35 PM

skov Bugger :( There is a... 18th February 2014, 01:16 PM

CTWV50 I've got the mazda wiring... 18th February 2014, 01:19 PM

skov The pinouts are almost... 18th February 2014, 01:45 PM

CTWV50 No mine is a B6 (115bhp) not... 18th February 2014, 01:53 PM

skov I'm confused too - I thought... 18th February 2014, 02:04 PM

CTWV50 Yeah sure, do it tonight.... 18th February 2014, 02:08 PM

CTWV50 HA! There you... 18th February 2014, 02:11 PM

CTWV50 OK I'm doubting myself now!... 18th February 2014, 02:12 PM

skov Ummm, I thought only the... 18th February 2014, 02:30 PM

CTWV50 You know what! I think your... 18th February 2014, 02:51 PM

CTWV50 It's a 90bhp. I believe you... 18th February 2014, 05:50 PM

skov As far as know you need to... 18th February 2014, 06:53 PM

CTWV50 Oh really! :D 18th February 2014, 07:04 PM

PorkChop The 115bhp 1.6 was dropped by... 18th February 2014, 10:48 PM

skov That's my weekend... 21st February 2014, 01:49 PM

james3004 So you'll be test driving by... 21st February 2014, 02:28 PM

skov Yes. But not this Saturday. 21st February 2014, 03:17 PM

skov Only two weeks late - just... 8th March 2014, 11:20 AM

CTWV50 I reached a major milestone... 8th March 2014, 06:32 PM

skov Cheers Chris. Would have... 8th March 2014, 07:48 PM

skov Some goodies in the post this... 24th March 2014, 09:19 AM

CTWV50 Did you make them or order... 24th March 2014, 07:24 PM

skov I got the boards from OSH... 24th March 2014, 10:16 PM

CTWV50 Wow! I'd be cross eyed doing... 24th March 2014, 10:20 PM

skov There's nothing much harder... 24th March 2014, 10:49 PM

skov My spare ECU with it's new... 27th March 2014, 01:34 PM

Stot Very cool. Looks like the... 27th March 2014, 01:56 PM

skov You're not wrong there Stot! 27th March 2014, 02:31 PM

skov It's showing early signs of... 27th March 2014, 08:34 PM

Dualist That's pretty cool mate :cool: 28th March 2014, 08:08 AM

Stot I wonder, is there room for... 28th March 2014, 11:48 AM

skov It will be if I manage to get... 28th March 2014, 12:58 PM

CTWV50 You're a mad genius!:cool: 28th March 2014, 02:02 PM

skov I may be mad, but I'm far... 1st April 2014, 01:18 PM

Davidbolam Hi skov, How about some... 1st April 2014, 11:38 PM

james3004 Does that mean I get a ride... 2nd April 2014, 08:11 AM

skov Sorry David, sadly my £7... 2nd April 2014, 09:28 AM

james3004 Yay! Let me know when!:D 2nd April 2014, 10:45 AM

skov bollox bollox bollox bollox... 9th April 2014, 02:46 PM

james3004 :eek: shit what happened????? 9th April 2014, 03:19 PM

CTWV50 Oh dear, I take it you're ok? 9th April 2014, 03:21 PM

skov Yeah I'm fine, just very peed... 9th April 2014, 04:36 PM

james3004 Glad your ok! How much deep... 9th April 2014, 05:01 PM

K4KEV yeah..... pleased you are ok... 9th April 2014, 06:02 PM

skov I don't know the full extent... 9th April 2014, 06:15 PM

CTWV50 Oh dear, that's all a bit... 9th April 2014, 06:56 PM

skov A shiny new bonnet would be... 9th April 2014, 07:45 PM

CTWV50 Bloody hell I've just sold my... 9th April 2014, 08:05 PM

SeriesLandy That isn't good, I'm glad... 9th April 2014, 10:06 PM

thailoz What a shame after just... 9th April 2014, 10:07 PM

j.brownster79 Oh dear fella sorry to hear... 10th April 2014, 06:04 AM

flyerncle Car is fixable,good that you... 10th April 2014, 07:50 AM

twinturbo Ahh Sh.... Glad your ok and... 10th April 2014, 08:16 AM

skov Thanks all. Still feeling... 10th April 2014, 01:36 PM

Stot I did the same thing when I... 10th April 2014, 01:59 PM

james3004 I might know someone that... 10th April 2014, 03:07 PM

skov I'm going to be upset if it... 10th April 2014, 03:54 PM

Stot Oh it wasnt years for the... 10th April 2014, 04:30 PM

skov Ah, got you. A few months is... 10th April 2014, 06:46 PM

skov Had the insurance assessor... 14th April 2014, 09:57 PM

CTWV50 So it's just parts damage no... 14th April 2014, 10:16 PM

skov Yep, it's looking that way. ... 14th April 2014, 10:45 PM

CTWV50 I'd be a millionaire if I... 14th April 2014, 10:50 PM

skov Spoke to the insurers today. ... 17th April 2014, 08:10 PM

CTWV50 That was quick! 18th April 2014, 06:46 AM

james3004 That's good news! You'll be... 18th April 2014, 12:13 PM

skov Not sure about no time, spoke... 18th April 2014, 12:59 PM

james3004 Does that mean I get a dodgy... 19th April 2014, 09:01 PM

skov Yep, yours if you want it... 19th April 2014, 09:37 PM

skov With my car in bits and... 22nd April 2014, 09:19 AM

CTWV50 A job I'll have to get too at... 23rd April 2014, 09:13 PM

alga I had the same. First I... 24th April 2014, 11:08 PM

skov Took a little longer than... 29th April 2014, 01:12 PM

skov ...and that's my shopping... 29th April 2014, 02:23 PM

james3004 Yay! Bet you're a happy... 29th April 2014, 06:54 PM

skov Moderately pleased, yes... 29th April 2014, 08:31 PM

CTWV50 What ye bought? 29th April 2014, 11:45 PM

skov Bonnet, nose cone, steering... 30th April 2014, 09:11 AM

CTWV50 New bodywork? 4th May 2014, 08:29 PM

skov New bonnet and nose cone. ... 4th May 2014, 08:34 PM

james3004 Any old useable bits you want... 4th May 2014, 09:20 PM

skov Not really, most of the... 4th May 2014, 09:47 PM

james3004 Ooh yes please to the... 4th May 2014, 10:23 PM

skov Cool, I'll keep hold of them... 4th May 2014, 11:39 PM

james3004 Thanks John, do you want... 5th May 2014, 10:43 AM

skov Nah, you're alright. Saying... 5th May 2014, 03:18 PM

james3004 Used them all already:eek:... 5th May 2014, 09:46 PM

skov Not quite, but we seem to be... 6th May 2014, 01:06 PM

james3004 Ha ha that sounds like good... 6th May 2014, 01:17 PM

skov Wooooo - just had my first... 14th May 2014, 10:01 PM

skov Back on the road... 15th May 2014, 08:30 PM

jason 82 What a bitch ! I feel really... 15th May 2014, 08:56 PM

skov Don't mention the d-word...... 15th May 2014, 09:06 PM

james3004 That's rubbish luck mate :( 15th May 2014, 10:54 PM

CTWV50 Bummer! Note to self -... 16th May 2014, 12:54 AM

skov If it's had 3 tears it... 16th May 2014, 07:29 AM

CTWV50 Ahahahaha! Why?:D 16th May 2014, 08:27 AM

skov Because they illuminate the... 16th May 2014, 09:03 AM

CTWV50 Oh they are just not very... 16th May 2014, 09:05 AM

Davidbolam What a bummer mate.... 16th May 2014, 02:28 PM

CTWV50 I got a genuine mazda one,... 16th May 2014, 02:50 PM

skov Yeah, the belt's easy to... 17th May 2014, 07:54 AM

CTWV50 Spoke to a friend who works... 18th May 2014, 10:44 AM

skov Just got my insurance... 13th June 2014, 01:37 PM

Davidbolam which insurer are you using?... 13th June 2014, 03:02 PM

skov I was with Adrian Flux, now... 14th June 2014, 12:10 AM

SeriesLandy I got mine from a-plan. Were... 14th June 2014, 05:25 PM

rpjg1975 Not sure where handyandy got... 14th June 2014, 10:21 PM

skov Blimey, that is cheap! ... 19th June 2014, 11:14 PM

skov Very happy today. Ever since... 19th June 2014, 11:23 PM

jason 82 You know what they say, every... 20th June 2014, 03:36 AM

Stot Was it the locator pin that... 20th June 2014, 08:51 AM

skov No, I don't think so. The... 20th June 2014, 01:11 PM

CTWV50 oops wrong thread 22nd September 2014, 10:24 PM

skov Just a little update, haven't... 22nd February 2015, 11:07 PM

CTWV50 Function over form, looks... 23rd February 2015, 06:06 PM

skov Farewell 31st March 2016, 01:16 PM

james3004 Sad to see you go mate :( 31st March 2016, 01:18 PM

K4KEV Defo keep us posted on your... 31st March 2016, 06:00 PM

vmax1974 Will start saving my pennys... 31st March 2016, 07:10 PM

CTWV50 Keep in touch. :) 25th July 2016, 10:30 AM

Stot Hi Skov, Looking at that I... 29th June 2013, 06:48 PM

skov I'll let you know what I do... 25th June 2013, 04:43 PM

skov I'm ok for aircraft plans,... 6th February 2011, 11:59 AM

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode