|
|
|
|
#1
31st August 2013, 09:05 PM
|
||||
|
||||
They are, apparently mine are being cut from the molds Monday morning.
|
|
#2
31st August 2013, 10:54 PM
|
||||
|
||||
|
My AGM arches are 795 mm between the inner lower corners. They seem to be exactly the same size as the Triton/Gillham ones. The fronts of my arches are 18 cm forward off the lower corner of the side panel.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. Last edited by alga : 31st August 2013 at 10:57 PM.
|
|
#3
31st August 2013, 10:59 PM
|
|||
|
|||
|
Quote:
David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg.
|
|
#4
6th September 2013, 08:04 PM
|
|||
|
|||
|
I collected my kit from agm today. Very helpful chap and the quality is really good. Now I just need to find somewhere to keep it and figure out how to fit it...
As soon as it stops raining I will post some pictures, I also saw a nice red set that was in the process of being polished up which looked really nice. David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg.
|
|
#5
6th September 2013, 08:17 PM
|
||||
|
||||
|
Quote:
 They'll be mine then. collecting them tomorrow first thing. Keeping mine in the conservatory now the weathers turned.
|
|
#6
6th September 2013, 08:35 PM
|
|||
|
|||
|
Quote:
Don't forget to take some old blankets! David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg.
|
|
#7
6th September 2013, 10:05 PM
|
||||
|
||||
|
Quote:
 Thanks for the blanket tip. 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
