|
|
#1
17th October 2013, 04:10 PM
|
||||
|
||||
c3 rear drum question
gotta do the wifes shitroen c3 pluriel 1.4l for mot and it needs the rear brake shoes doing
my question is does anyone know what size socket i need for the rear hub nut the staked one that holds the drum on rest of what in needs i got sorted as far as i can see is needs sidelight bulbs number plate bulb wiper blades front tyres drop links rear brakes exhaust back box then a gotta figure out where all the oil is coming from all over the front of the engine drop the sump off and fish out the end of the dipstick change oil filter then relpace sump with new dipstick then pour the oil back in any help on the nut size greatly appreciated 
|
|
#2
18th October 2013, 10:53 AM
|
|||
|
|||
|
32/36 mm ? Possibly.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
