Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 24th October 2013, 11:38 AM
thailoz thailoz is offline
Senior Member
 
Join Date: Mar 2013
Location: Thailand
Posts: 140
Default Work resumed

Well after a long time of doing nothing to the car due to work and other every day things I have started on the car again.

My parents came over to visit at the end of September until Yesterday As I may have mentioned before My farther Is a ex chief mechanic of Team lotus F1 but he started working for lotus when they were based in Cheshunt making what was then a kit car the lotus 7 .

So after long chats and looking at original 7 plans as well as the Haynes and Chapman books he helped me re design the rear of the Haynes chassis to accommodate a live rear axle. I basically removed SB1 and replaced it with a single piece of 25mm box and re set D9 to 90 degrees (as in Ron's book).`We also decided to add some fillets to the top and bottom of D9 to add some strength.

I have sourced a Toyota van axle which should be here soon but it coming through a friend of a friend (Thais ) so who knows what I will end up with :shock: .
I will yous a 5 link axle set up. with rose joints on one end of the trailing arms for accurate adjustment.
same with the Panhard rod.I have also added D5 U7 and U8 .

I am now in the process of fully welding the chassis thus far except for U7 an U8 and the 2 SB4s as I still have to get the gearbox and axle.

I will be going on a hunt for some Hiace 5 stud or corolla uprights then I will be able to start on my wishbones. I will update my blog as soon as I get some pics.
__________________
My build diary is at http://thailoz.wordpress.com/
Reply With Quote
  #2  
Old 26th January 2014, 10:43 AM
thailoz thailoz is offline
Senior Member
 
Join Date: Mar 2013
Location: Thailand
Posts: 140
Default Back at it again after a delay an work etc .

Well guys I am back at the build again this past week so check out my blog
__________________
My build diary is at http://thailoz.wordpress.com/
Reply With Quote
  #3  
Old 26th January 2014, 03:45 PM
voucht's Avatar
voucht voucht is offline
Senior Member
 
Join Date: Jun 2011
Location: Lautrec, Tarn (81), Occitanie, France
Posts: 879
Default

Hi!

Good to see you're back at your build mate.

Hope you are safe from the events in Bangkok.

No Thailand for me this year (and no diving ) too much work here. Otherwise I would have travelled a bit more to come to meet you and see your car. Perhaps next year?

Good luck
Reply With Quote
  #4  
Old 26th January 2014, 07:38 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

my brother has just spent 3 weeks there (jealous as fook)
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #5  
Old 27th January 2014, 12:16 AM
thailoz thailoz is offline
Senior Member
 
Join Date: Mar 2013
Location: Thailand
Posts: 140
Default

Quote:
Originally Posted by voucht View Post
Hi!

Good to see you're back at your build mate.

Hope you are safe from the events in Bangkok.

No Thailand for me this year (and no diving ) too much work here. Otherwise I would have travelled a bit more to come to meet you and see your car. Perhaps next year?

Good luck
I am about 40 km from Bangkok so no problems If you do make it out would be happy to meet you tho its bloody cold here at the mo 18 C
__________________
My build diary is at http://thailoz.wordpress.com/
Reply With Quote
  #6  
Old 27th January 2014, 03:15 AM
vmax1974's Avatar
vmax1974 vmax1974 is offline
Senior Member
 
Join Date: Apr 2011
Location: Teesside
Posts: 1,141
Default

Quote:
Originally Posted by thailoz View Post
I am about 40 km from Bangkok so no problems If you do make it out would be happy to meet you tho its bloody cold here at the mo 18 C
#### off lucky git would have given my back teeth for that temp at work on sunday instead i had 2 C heavy rain with wind followed by snow thunder and lightning then only after i had finished work i got sunshine

so to sum up i was cold wet and bloody miserable then blinded on my way home
Reply With Quote
  #7  
Old 27th January 2014, 10:27 AM
thailoz thailoz is offline
Senior Member
 
Join Date: Mar 2013
Location: Thailand
Posts: 140
Default

Quote:
Originally Posted by vmax1974 View Post
#### off lucky git would have given my back teeth for that temp at work on sunday instead i had 2 C heavy rain with wind followed by snow thunder and lightning then only after i had finished work i got sunshine

so to sum up i was cold wet and bloody miserable then blinded on my way home
True but its all relative I moved here to get away from sub 20 weather so for me a drop in 20 degrees is a hell of a lot .

I dont envy you guys and I am gonna have a lot of driving time if i get this thing finished.
__________________
My build diary is at http://thailoz.wordpress.com/
Reply With Quote
  #8  
Old 28th January 2014, 04:20 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

That's what you get for living in Smog Central.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 05:45 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.