|
|
#3
13th December 2013, 09:23 PM
|
||||
|
||||
Deposit would be 30% of the cost so either £300 or £360 depending on what the material costs for the moulds and body parts come to. Work on the project would start in feb once I have the moulds made for my standard Roadster nose, bonnet, scuttle and arches.
I must point out at this point that a 'loanable' kit would be needed for the head and indicator lights for the front to pass the IVA.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 Last edited by Talonmotorsport : 13th December 2013 at 09:26 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode