mx5 inlet/bonnet problems

[skov]

Originally Posted by Talonmotorsport

This is from a blog which can be found on google and uses GSXR throttle bodies, injector ports have been sealed here but would still run injectors if left standard.

That's only the GSXR ports that have been sealed. The MX5 ones are still open and useable in that photo (they're right up against the head on what's left of the MX5 manifold)

Originally Posted by Talonmotorsport

This is from the states, looks very nice all polished up in ali but is very costly

If you could do something like this for the 1.6, but relatively cheap and not shiny (not a fan of polishing!) I might be interested.
Now if you need a beta tester...