|
|
|
|
#1
5th January 2014, 07:04 PM
|
|||
|
|||
There is an answer to this that might not be too popular but I'm going to say it any way,forget 4 point harnesses and fit inertia reel seat belts.
Reason 1: keep the same seats for IVA and post IVA Reason 2: you sit at the end of a long bonnet in these cars and in 4 point harnesses you can't lean forward to look left past your passenger at junctions Reason 3: have you ever taken a 7 into a pay at entry car park or at the toll booth and had to undo your 4 point belts? Reason 4: one size fits all no need to adjust them for every body that gets in the passenger seat I leave you to mull that little lot over before every body shoots me down in flames...
__________________
Unofficially rated No.1 supplier of fabricated Haynes Roadster parts by the workshop rat population. Direct email talonmotorfabrication@gmail.com Last edited by TalonMotorFabrication : 5th January 2014 at 07:51 PM. 
|
|
#2
5th January 2014, 07:29 PM
|
||||
|
||||
|
Quote:
Reason 6: ...or 10 minutes if you left your helmet/gloves in the passenger footwell and didn't realise until it was too late. Reason 7: Adjusting your passenger wing mirror with your left foot whilst driving might be amusing but is probably neither safe nor legal!
|
|
#3
5th January 2014, 07:34 PM
|
|||
|
|||
|
Actually I like the sound of that.
I didn't realise that was possible as harnesses just seem to be the norm. Do you have any info if I were to go that route?Parts needed and where would they be mounted
|
|
#4
5th January 2014, 07:35 PM
|
||||
|
||||
|
Isn't there a bit in 'the book' about it?
|
|
#5
5th January 2014, 07:51 PM
|
|||
|
|||
|
Oh come on... you don't really want us to spoon feed you all the answers do you? Go and look at how a standard reel belt is mounted and at your build around RS5/6/7/7A and where SB1 joins to BR12 or where SB1 joins to SB3.....
I'm sure you can work some thing out from that.
__________________
Unofficially rated No.1 supplier of fabricated Haynes Roadster parts by the workshop rat population. Direct email talonmotorfabrication@gmail.com
|
|
#6
5th January 2014, 08:53 PM
|
|||
|
|||
|
Haha yes I do.
Found the bit in the book on page 119. It seems as though the donor reels can be used. I was expecting to need new items with some sort of type approval. I will also check through the IVA manual
|
|
#7
6th January 2014, 12:24 PM
|
|||
|
|||
|
Fairly sure the dimensions/picture for roll bar have brackets fitted to top corners for inertia reels to be used.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
