Fuel & Brake pipes

[skov]

Yep, I used the MX5 master cylinder. Can't remember what size the fittings are but they're definitely metric.
Sounds like you might be missing the little adapter that converts the larger fitting to the same size as the others:

[Numplumb]

Thanks for that information, I will check it again it seems that I have another part on mine than you have in your pic maybe I don't need part.
And thanks also to you alga.
Regards Mick.

[skov]

Ah, have you still got the funny brake bias thing attached?
I junked mine.

[Numplumb]

Two pipes coming around reservoir to a tee piece on a bracket and three pipes off it two slightly smaller than the other one is this not needed then, do you fit a bias part somewhere else or is one not needed? There's labels on mine saying front rear etc.
Regards Mick.

[skov]

Yeah, that sounds like the brake bias valve.
It looked like it was going to be a pain to fit, so I got rid of it and stuck a mondeo valve in the rear line instead.
As it happens I failed IVA because my rear brakes were far too weak
I took the Mondeo valve out and replaced it with a bit of brake line and passed.
The rear brakes on the MX5 are a bit pants at the best of times, which is why I guess a bias valve isn't needed.

[Numplumb]

Cheers skov I will have to think about it a bit more because I'm using the MX5 pedals and maybe the servo.
Regards Mick.