MX5 rear upright bush?

[j.brownster79]

I got mine for free when I brought all the other bushes which was about 50 quid I did put the guys details on a thread I'm sure he could supply just those bushes cheap just mention the forum and me as I did ask if it was ok to put his details on here.

[vmax1974]

Originally Posted by j.brownster79

I got mine for free when I brought all the other bushes which was about 50 quid I did put the guys details on a thread I'm sure he could supply just those bushes cheap just mention the forum and me as I did ask if it was ok to put his details on here.

it is the same guy he is a mate of mine

[j.brownster79]

Originally Posted by vmax1974

it is the same guy he is a mate of mine

Top bloke!!

[TalonMotorFabrication]

Been chatting to your man Mark via email past few days about buying them in bulk as every one who has MX5 running gear is going to need these bushes at some point.
The rubber bushes on both pairs of my uprights are shot and are very soft as a result, however given the design of the Saturn top wishbone and where the coilover mounts on my TMXR design I'm thinking that a harder bush would help transfer the movement of the suspension to the coilover better. Any body that has the Saturn design on the road and using a higher spring rate got any thoughts about this?

I would seem to be the logical person to arrange a group buy and get them sent out as I'm around during the day to take deliveries and arrange courier collections.
I'm looking at keeping things very simple incase this back fires on me and only supplying them in yellow or black not that they will be seen behind the rear disks.

[StruveD]

The bigger need, at least in my case is keeping the top of the upright centered in the upper control arm bracket. I found that any warping or misalignment in the lower control arm or brackets lead to the top of the upright binding on the inside upper control arm. So adding a polyurethane bushing/spacer should keep things from twisting.

[vmax1974]

Originally Posted by TalonMotorFabrication

Been chatting to your man Mark via email past few days about buying them in bulk as every one who has MX5 running gear is going to need these bushes at some point.
The rubber bushes on both pairs of my uprights are shot and are very soft as a result, however given the design of the Saturn top wishbone and where the coilover mounts on my TMXR design I'm thinking that a harder bush would help transfer the movement of the suspension to the coilover better. Any body that has the Saturn design on the road and using a higher spring rate got any thoughts about this?

I would seem to be the logical person to arrange a group buy and get them sent out as I'm around during the day to take deliveries and arrange courier collections.
I'm looking at keeping things very simple incase this back fires on me and only supplying them in yellow or black not that they will be seen behind the rear disks.

not sure who mark is stuart is the man i deal with could be a different poly bush company

if you want to arrange the group buy then be my guest mot trying to steal your thunder or make any money out of it just trying to be helpful by using my contacts list to benefit others

[TalonMotorFabrication]

So providing there is enough interest in this group buy I can offer a pair of rear upright bushes in either black or yellow with stainless steel crush tubes with 10mm or 12mm through holes for £12 tracked/insured/delivered.

Copy and paste the list to a reply and add your screen/user name, payment via paypal.... Any body?

1:Talon yellow 12mm
2:Numplumb black 12mm
3:
4:
5:
6:
7:
8:
9:
10:

[TalonMotorFabrication]

Originally Posted by vmax1974

not sure who mark is stuart is the man i deal with could be a different poly bush company

if you want to arrange the group buy then be my guest mot trying to steal your thunder or make any money out of it just trying to be helpful by using my contacts list to benefit others

Don't worry I'm not bothered if I run it or not just thought as I was going to buy in bulk that I would offer them out at near cost first. I'm shopping around at the moment for the best deals on all the MX5 parts that people will/may need during their builds.

[Dualist]

1: Talon yellow 12mm
2: Numplumb black 12mm
3: Dualist black 12mm
4:
5:
6:
7:
8:
9:
10:

Let me know when you want payment