|
|
|
|
#1
23rd June 2014, 03:14 PM
|
|||
|
|||
Hi Jason,
The AGM kit is nicely made, and is nice and thick and well finished. However I've had some issues with my side panels fitting with the returns aswell, it might be chassis tolerance issues and or bodywork issues.
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501 
|
|
#3
23rd June 2014, 04:33 PM
|
|||
|
|||
|
Bet that hurt !
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#5
23rd June 2014, 09:01 PM
|
||||
|
||||
|
I had the same problem with my Saturn sides. I had to cut the lip off where the chassis changes direction.
Also my first nose one fit perfectly under the bottom rail. My replacement one I had to make some brackets as the bottom lip wouldn't go under the bottom rail.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
