Chris's new build of an MX5 based car

[CTWV50]

Originally Posted by SeriesLandy

Are you sure that you can see the side repeater from the rear. I managed to see it 5deg to the side but not 5deg down. The arch was in the way. Even though you would see the rear indicator.
I put mine in the rear arch (the small led ones from bolt on bits) I tapped it into the rear lights.
If you do this it must be a max of 2600mm from the front.

Yep tested it with string, an iPhone inclinometer and a bit of trigonometry , remember you only need to be able to see 50% mind. I'll test it again though!