|
|
|
|
#1
3rd August 2014, 12:57 PM
|
|||
|
|||
The general consensus is caster should be between 5 and 7 degrees. But you need to take off the 10mm of neg trail in the upright or you wont be getting that in real terms. The upright. http://www.super7thheaven.co.uk/Sierra_Upright
I always thought it would have been better to have a fully adjustable top wishbone so there was the scope to dial in what you need. http://trikingsportscars.co.uk/wp-co...wishbones1.jpg Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669 
|
|
#2
11th August 2014, 12:21 AM
|
||||
|
||||
|
mine is spot on 6.3deg both sides using offset mushrooms. i faced the offset hole forwards. if you line the centre of the hole up with the line in the front of the casting it should be absolutely spot on if the chassis is built correctly.
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/
|
|
#3
17th August 2014, 02:36 PM
|
|||
|
|||
|
Thanks everyone, I will have a measure and see how close I am
Cheers David
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
