Connecting engine and gearbox...!!! Grr!!!

[jps]

Originally Posted by flyerncle

Put it together on the floor and lift chassis over the top,then lift up with crane,or put together and lift in as you said at a high angle,it will go in that way done it twice,make sure there is no oil in the box or seal the end it makes a stinky mess on the floor.

I have done the dropping it in from above before - i.e. gearbox output pointing at floor - then lift it up as it goes under the scuttle...

I will try it the other way round and see how I get on... I can picture it in my head as possibly working quite well!!!!