Connecting engine and gearbox...!!! Grr!!!

[jps]

Originally Posted by onedayTM

I to have had to put engine/box in by myself, it is a pain but if you dont have one of those levellers I used a ratchet strap round end of box and back up to a bar thro one of holes in hoist beam. Then as you move forward and get close to scuttle area drop box by loosening ratchet strap and then back and forward push in lower down and so on. Mine is still up on trestles but if mine was on floor I think I would lift chassis up an over!
tony

I'm going to buy a load leveler and go for it that way - reckon it'll be the easiest solution. Thanks guys!