|
|
|
|
#2
14th September 2014, 11:31 PM
|
||||
|
||||
Some how I made my engine mount 32mm too low, so the engine ports ran straight through the top rail. Once I realised this I packed it up with some 10mm plate (3 of) and it seems fine to me.
One day I will remake the engine mount. 
|
|
#3
15th September 2014, 12:55 AM
|
|||
|
|||
|
more or less as fly said I put my engine plates and the rubbers in plave first then cut the box to fit it is fiddily but its the best way i reckon.
__________________
My build diary is at http://thailoz.wordpress.com/
|
|
#4
15th September 2014, 01:17 PM
|
|||
|
|||
|
Another thought,forget the book mounting plates and just put 5mm plate on chassis legs at the front.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#5
15th September 2014, 10:33 PM
|
||||
|
||||
|
Quote:
I originally had the book mounts and the steering column shaft went through the top of the rubber bolt, so it didn't really work.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
