![]()  | 
	
| 
		 
			 
			#1  
			
			
			
			
			
		 
		
		
	 | 
|||
		
		
  | 
|||
| 
	
	
		
			
			 Just picked this up off ebay for £465, with a weeks MOT. As the sun's been out I thought I might as well MOT it and run it for a while to make sure the engine's good . Cost me £26 in rear brake parts to get it through   
		
	
		
		
		
		
		
	
		
		
	
	
	![]() Gave it an oil change today before giving it the beans, and WOOOHOOO!! It's a flying machine!! Got an M50 inlet manifold to fit which should add about 30bhp. OMG it'll be mental in a Haynes!! The engines been to the moon and back (several times) at 220k+ but has loads of service history , you can't hear it running, and it passed MOT emissions with totally shagged plugs a blocked air filter and oil like tar. So with a bit of TLC I think it'll make a decent donor. It's the first time I've driven one of these and it's a cracking smooth engine that pulls from nothing and just gets stronger and stronger as the revs rise.  | 
| 
		 
			 
			#2  
			
			
			
			
			
		 
		
		
	 | 
|||
		
		
  | 
|||
| 
	
	
		
			
			 Got the M50 manifold on now. Not a job I'll be in a hurry to do again!! Absolute tw@t to get off!!  
		
	
		
		
		
		
		
	
		
		
	
	
	What looks like a 1-2hr job, easily ran into a full 1/2 day to complete. Anyway, it's on now c/w its 'remapped' ECU and it goes like stink!! I reckon it's faster in a straight line than the 3.0 V6 MR2 I built, so easy to believe it's putting 230bhp out. If anything it's smoother to drive too, which is a bonus. I'm still struggling to get my head around how mental this is going to be in a '7'!!  | 
| 
		 
			 
			#3  
			
			
			
			
			
		 
		
		
	 | 
||||
		
		
  | 
||||
| 
	
	
		
			
			 Will be fun 
		
	
		
		
		
		
			However I think you will find that the engine has only made it close to the moon once as it's avrages about 238,000 miles from the earth. ![]() TT 
				__________________ 
		
		
		
		
	
		
		
	
	
	You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders  | 
| 
		 
			 
			#4  
			
			
			
			
			
		 
		
		
	 | 
||||
		
		
  | 
||||
| 
	
	
		
			
			 My car will be putting out about that and it is mental.... just need to be careful about how much leather to use around corners.....that will be a heavyish motor so think about trying to equalize it at the back end, I know I put a BIG 3mm heavy ally tank in and I know gradually when it is starting to let go in a very predictable manner, if your back end is light it won't give you any notice it's about to slide......thats a nice find on good ol ebay at bargain money which you will proably get back in parts then 80-100 at an EOL breakers. 
		
	
		
		
		
		
		
	
		
		
	
	
	 | 
| 
		 
			 
			#5  
			
			
			
			
			
		 
		
		
	 | 
|||
		
		
  | 
|||
| 
	
	
		
			
			 Quote: 
	
 ![]()  | 
| 
		 
			 
			#6  
			
			
			
			
			
		 
		
		
	 | 
|||
		
		
  | 
|||
| 
	
	
		
			
			 Quote: 
	
  | 
![]()  | 
		
	
| Thread Tools | |
| Display Modes | |
		
  | 
	
		
  |