![]() |
|
#1
|
|||
|
|||
![]() Thanks for replies there is some with indicators for £18 on EBay it's just that I didn't want to put side repeaters on the front wings and thought that on the mirrors was an alternative, my day car has them built in the mirrors and no other side repeaters.
Regards MIck. |
#2
|
|||
|
|||
![]() Skov and myself used the cheap mirrors from furore and the iva inspector said they were very good. They were also cheap and came the next day
David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
#3
|
||||
|
||||
![]() Quote:
![]() |
#4
|
||||
|
||||
![]() Neither my mirrors nor indicators were E Marked. Mirrors need to be the correct size and meet radius rules. The indicators don't need to be E marked either, just be as bright as an equivalent E marked lamp.
They would need to be positionable and be seen from the appropriate viewing angles though. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024 |
#5
|
||||
|
||||
![]() Quote:
|
#6
|
||||
|
||||
![]() Quote:
I had that for my small rear reflectors (not marked). I had some 'E' marked stickon spares in the car but he said they were ok in the end, as "I doubt you'll use it much at night anyway" |
#7
|
||||
|
||||
![]() Quote:
|
![]() |
Thread Tools | |
Display Modes | |
|
|