Rosco's haynes Build - Haynes Forums

Rosco Rosco's haynes Build... 26th October 2014, 07:13 PM

Rosco Then got things marked out... 26th October 2014, 07:14 PM

Rosco I was surprised how quick it... 26th October 2014, 07:15 PM

Rosco http://i133.photobucket.com/al... 26th October 2014, 07:15 PM

Rosco Got my roll bar bent up... 26th October 2014, 07:16 PM

garyt welcome and that's some... 26th October 2014, 07:56 PM

Rosco Haha cheers, it has been two... 26th October 2014, 08:34 PM

thailoz Great progress well done 26th October 2014, 09:11 PM

K4KEV Nice one Rosco and welcome to... 27th October 2014, 08:36 AM

dubzter great progress in such a... 27th October 2014, 11:48 AM

flyerncle Welcome to house of fun,save... 27th October 2014, 11:51 AM

SeriesLandy Looking good. Is the pedal... 27th October 2014, 01:39 PM

Rosco Cheers Haha, I hope... 27th October 2014, 08:02 PM

Rosco A bit more done tonight, took... 28th October 2014, 10:08 PM

Rosco Some more progress ready for... 30th October 2014, 07:35 PM

garyt you're definitely not hangin... 30th October 2014, 08:07 PM

voucht I'm also very impressed with... 31st October 2014, 05:31 PM

Rosco Your build seems to be moving... 31st October 2014, 08:15 PM

Dualist Nice work, at this rate... 31st October 2014, 08:37 PM

SeriesLandy You seem to be blazing along.... 31st October 2014, 08:40 PM

Rosco Ok mate cheers, prob use 2mm... 2nd November 2014, 06:44 PM

SeriesLandy It will flex when you brake.... 2nd November 2014, 07:00 PM

Rosco Ok mate cheers, no problems,... 2nd November 2014, 07:20 PM

SeriesLandy If your going to use mx5 bits... 2nd November 2014, 07:24 PM

Rosco Yeah I'm use using sierra... 2nd November 2014, 07:46 PM

SeriesLandy I've no idea what the cutouts... 2nd November 2014, 07:49 PM

Rosco Haha ok cheers, thought i was... 2nd November 2014, 07:51 PM

SeriesLandy Found the pedal box here... 2nd November 2014, 07:56 PM

Rosco Got my chassis welded up this... 9th November 2014, 07:32 PM

Rosco http://i133.photobucket.com/al... 9th November 2014, 07:33 PM

Rosco Not so much progress as as I... 18th November 2014, 09:41 PM

Rosco http://i133.photobucket.com/al... 18th November 2014, 09:42 PM

Tatey Rosco, do you know what... 19th November 2014, 07:01 AM

Rosco Cheers, think im going the... 19th November 2014, 08:13 AM

Rosco Bit of an update, got my rear... 7th December 2014, 06:06 PM

twinturbo Try ebay for a column, or... 7th December 2014, 07:26 PM

Rosco Yeah I've got my eye out but... 7th December 2014, 08:12 PM

Rosco Well had a full day on the... 15th December 2014, 07:58 AM

Rosco http://i133.photobucket.com/al... 15th December 2014, 08:00 AM

flyerncle Quality !;) 15th December 2014, 10:53 AM

K4KEV Very tidy indeed, keep it up... 15th December 2014, 01:01 PM

garyt nice work and good progress,... 15th December 2014, 07:05 PM

Rosco Cheers guys I like to get a... 15th December 2014, 08:24 PM

Rosco Got my rear wishbones back... 20th December 2014, 07:58 PM

Rosco Fitted the old calliper to... 20th December 2014, 07:59 PM

Rosco http://i133.photobucket.com/al... 20th December 2014, 07:59 PM

Rosco after sleeping on this a... 22nd December 2014, 07:35 AM

Rosco Well got a bit of time on my... 26th December 2014, 08:28 PM

Rosco Got a bit more done this... 27th December 2014, 03:28 PM

Rosco Well had a good day, went and... 28th December 2014, 08:23 PM

Dualist Those new arms look really... 30th December 2014, 05:49 PM

Rosco Cheers for the comments! Sat... 30th December 2014, 09:56 PM

ayjay Whens the divorce ?:o 31st December 2014, 12:57 PM

Rosco Haha, not yet, she's putting... 31st December 2014, 06:02 PM

Rosco Bit more done today, had my... 31st December 2014, 06:02 PM

Rosco http://i133.photobucket.com/al... 31st December 2014, 06:03 PM

Rosco I can rase the car up or down... 31st December 2014, 06:03 PM

wylliezx9r When I had a bike engine in... 31st December 2014, 07:10 PM

Tatey Ross you want the input and... 1st January 2015, 08:50 AM

Rosco Ok mate thanks for that, it's... 1st January 2015, 01:24 PM

Rosco Just been looking at engine... 1st January 2015, 01:24 PM

Rosco http://i133.photobucket.com/al... 1st January 2015, 01:25 PM

flyerncle Argument was about angle of... 1st January 2015, 02:20 PM

Rosco Sorry I'm confused, what... 1st January 2015, 02:41 PM

Tatey Ross you can just use a 2 UJ... 1st January 2015, 02:23 PM

Rosco Yeah I thought that but I... 1st January 2015, 02:43 PM

Rosco Few exhaust clearance... 1st January 2015, 03:02 PM

Rosco Well spoke to AB performance... 5th January 2015, 09:09 PM

Rosco Think I've got clearance... 5th January 2015, 09:09 PM

jps I believe the Equinox scuttle... 6th January 2015, 08:29 AM

Rosco yes if you wouldn't mind,... 6th January 2015, 10:43 AM

voucht Hi, Have look... 6th January 2015, 02:47 PM

Rosco Cheers, very helpful! 6th January 2015, 08:23 PM

Rosco Engine position... 6th January 2015, 08:23 PM

jps Pics didn't come out so well... 6th January 2015, 10:01 PM

jps Forgot to mention, those... 6th January 2015, 10:02 PM

flyerncle Before you go to far think... 7th January 2015, 09:17 AM

Rosco Yeah, I'm going to run a... 7th January 2015, 07:02 PM

Rosco Well had a measure up for my... 9th January 2015, 08:00 PM

SeriesLandy Looking good so far. Don't... 9th January 2015, 10:53 PM

Rosco Cheers, will do 10th January 2015, 05:40 PM

Rosco Got my radiator mounted today... 10th January 2015, 05:41 PM

Rosco Then I set about making some... 10th January 2015, 05:41 PM

Rosco I decided to rubber mount my... 10th January 2015, 05:42 PM

Rosco Side engine... 10th January 2015, 05:42 PM

dubzter That's some real tidy work... 11th January 2015, 10:57 AM

Rosco Cheers, pretty pleased with... 11th January 2015, 04:43 PM

Rosco Busy evening tonight, My... 12th January 2015, 10:06 PM

Rosco http://i133.photobucket.com/al... 12th January 2015, 10:06 PM

Rosco http://i133.photobucket.com/al... 12th January 2015, 10:07 PM

Rosco Got my coolant hoses on... 13th January 2015, 09:15 PM

Rosco That's running from the lower... 13th January 2015, 09:15 PM

Rosco I just need to decide where... 13th January 2015, 09:17 PM

Rosco First job today make a dummy... 17th January 2015, 03:35 PM

Rosco http://i133.photobucket.com/al... 17th January 2015, 03:35 PM

flyerncle You may want to add some sort... 17th January 2015, 05:57 PM

TheArf I think you might find that... 19th January 2015, 09:07 AM

Rosco Got my seats from JK... 24th January 2015, 07:41 PM

Rosco http://i133.photobucket.com/al... 24th January 2015, 07:41 PM

Rosco http://i133.photobucket.com/al... 24th January 2015, 07:42 PM

rpjg1975 Looking good there, sure... 24th January 2015, 08:29 PM

SeriesLandy You don't have to have a... 24th January 2015, 08:45 PM

Rosco Yeah you can use the steering... 24th January 2015, 09:19 PM

rpjg1975 Ah cool, that's good then :D 24th January 2015, 11:52 PM

Rosco Got a bit done this... 30th January 2015, 07:48 PM

Rosco I've had these cut out of 2mm... 30th January 2015, 07:49 PM

Rosco Picked up a cat today to,... 30th January 2015, 07:49 PM

NeilW Great build so far mate, nice... 31st January 2015, 07:07 PM

Rosco Cheers, yeah get cracking! 1st February 2015, 07:29 PM

Rosco Down my dads all day today,... 1st February 2015, 07:30 PM

Rosco http://i133.photobucket.com/al... 1st February 2015, 07:31 PM

Rosco Right no updates for a few... 10th March 2015, 08:36 PM

Rosco http://i133.photobucket.com/al... 10th March 2015, 08:36 PM

Rosco Clean parts bin filling... 10th March 2015, 08:37 PM

Rosco Parts painted by my dad while... 10th March 2015, 08:38 PM

Tatey Build is looking very good... 11th March 2015, 01:01 PM

Rosco Cheers mate, I'm going to... 12th March 2015, 08:57 PM

Tatey I believe it is a... 12th March 2015, 09:17 PM

SeriesLandy I used these olive bearing... 12th March 2015, 10:21 PM

flyerncle As above they are the same on... 13th March 2015, 08:00 AM

Rosco Well the lathes almost there,... 20th March 2015, 07:38 PM

Rosco http://i133.photobucket.com/al... 20th March 2015, 07:39 PM

Rosco I'm happy with the silencer... 20th March 2015, 07:40 PM

Rosco A bit of an update tonight, I... 30th March 2015, 08:56 PM

Rosco Pedals http://i133.photobucke... 30th March 2015, 08:57 PM

dubzter that pedal box looks amazing,... 30th March 2015, 09:00 PM

Tatey Lathe and pedal box are... 30th March 2015, 09:30 PM

metal matt Now that is a fine bit of... 30th March 2015, 09:32 PM

Rosco Cheers for the comments, it's... 1st April 2015, 10:21 PM

Rosco A bit more done tonight, I... 1st April 2015, 10:21 PM

flyerncle Porn in metal that pedal... 2nd April 2015, 10:31 AM

Rosco Had a good few days on the... 6th April 2015, 05:13 PM

Rosco http://i133.photobucket.com/al... 6th April 2015, 05:14 PM

Rosco Rear diagonal... 6th April 2015, 05:14 PM

Rosco This weeks progress I... 12th April 2015, 01:48 PM

Rosco Upper seat brackets done, I... 12th April 2015, 01:49 PM

Rosco Clutch... 12th April 2015, 01:50 PM

scutter Dude, still mighty... 12th April 2015, 06:29 PM

Ianr Daren't put any pics of my... 12th April 2015, 06:46 PM

dubzter Awesome work, looking forward... 12th April 2015, 10:11 PM

Rosco Lol cheers, just a bit of... 13th April 2015, 07:56 PM

flyerncle Excellent tweeks to original... 14th April 2015, 08:21 AM

vmax1974 A bit like rosco"s build... 14th April 2015, 09:21 AM

voucht Hi Rosco, As everyone here,... 14th April 2015, 12:25 PM

flyerncle Exactly !;) 14th April 2015, 12:53 PM

Rosco Cheers for the comments guys!... 14th April 2015, 10:01 PM

flyerncle If you have a spare five... 16th April 2015, 11:00 AM

Rosco Haha yeah, when my cars... 26th April 2015, 06:36 PM

Rosco Good progress the last few... 26th April 2015, 06:36 PM

Rosco Exhaust altered and posted... 26th April 2015, 06:37 PM

Rosco http://i133.photobucket.com/al... 26th April 2015, 06:38 PM

Rosco Bit of an update, didn't have... 9th May 2015, 09:23 PM

Rosco More slugs... 9th May 2015, 09:24 PM

Rosco http://i133.photobucket.com/al... 9th May 2015, 09:24 PM

Rosco Machining the blocks to house... 9th May 2015, 09:25 PM

Rosco Steady progress this week I... 16th May 2015, 09:09 PM

Rosco http://i133.photobucket.com/al... 16th May 2015, 09:10 PM

Rosco Lower engine mounts tacked... 16th May 2015, 09:11 PM

Rosco Also made myself a list, my... 16th May 2015, 09:11 PM

SeriesLandy Looking fantastic as... 16th May 2015, 09:46 PM

Rosco Cheers, some good points... 16th May 2015, 10:10 PM

Rosco Cheers, my dad's made good... 17th May 2015, 05:52 PM

SeriesLandy You now need to apply... 17th May 2015, 08:38 PM

Rosco cheers for that, letters in... 20th May 2015, 01:24 PM

Rosco Got my stearing wheel last... 24th May 2015, 07:56 PM

Rosco http://i133.photobucket.com/al... 24th May 2015, 07:57 PM

CTWV50 This is going to be a... 24th May 2015, 08:55 PM

Rosco Haha thanks, everybody needs... 24th May 2015, 09:16 PM

Rosco Went off up to Race... 26th May 2015, 08:10 PM

SeriesLandy I've got the same dash and... 26th May 2015, 08:35 PM

Rosco Not much to get on with this... 31st May 2015, 03:53 PM

Rosco Also got my bead roller... 31st May 2015, 03:53 PM

Rosco http://i133.photobucket.com/al... 31st May 2015, 03:54 PM

Badger Some nice tinwork there mate,... 31st May 2015, 11:52 PM

SteveH1 Hi Do you have plans for the... 4th June 2015, 09:14 PM

Rosco yeah just winged it, it works... 5th June 2015, 03:18 PM

Rosco Prop shaft turned up from... 7th June 2015, 09:27 PM

Rosco Gear linkage mocked... 7th June 2015, 09:28 PM

Rosco http://i133.photobucket.com/al... 7th June 2015, 09:29 PM

Rosco http://i133.photobucket.com/al... 7th June 2015, 09:30 PM

Rosco Got a couple of prop catchers... 9th June 2015, 09:43 PM

Rosco Quick update, just tacking... 22nd June 2015, 08:56 PM

SeriesLandy Looking great like... 22nd June 2015, 10:06 PM

Rosco Cheers mate, yeah I'm going... 23rd June 2015, 08:02 PM

SeriesLandy One of the other companies... 24th June 2015, 07:22 AM

Rosco Well stripped my car down... 27th June 2015, 08:24 PM

Rosco Baffle plate and new oil... 27th June 2015, 08:24 PM

Rosco Got my sump fitted today,... 28th June 2015, 08:36 PM

Rosco Got my carbon fibre tube that... 7th July 2015, 09:25 PM

Rosco Needed a tool to strip my... 12th July 2015, 08:10 PM

Rosco http://i133.photobucket.com/al... 12th July 2015, 08:10 PM

Rosco Got my fuel... 12th July 2015, 08:11 PM

Rosco Rear seat... 12th July 2015, 08:11 PM

Rosco Made a few modifications to... 13th July 2015, 07:25 PM

Rosco Got my floor beaded tonight... 14th July 2015, 07:57 PM

vmax1974 Looking good as usual loving... 15th July 2015, 08:07 AM

Davidbolam Really nice build there. I... 15th July 2015, 12:10 PM

Rosco Urm, I'm not really sure to... 15th July 2015, 09:01 PM

Rosco Dropped my chassis and... 19th July 2015, 05:30 PM

Rosco http://i133.photobucket.com/al... 19th July 2015, 05:31 PM

NeilW Looks awesome mate, the pedal... 19th July 2015, 05:47 PM

K4KEV Well tidy mate, should... 19th July 2015, 06:52 PM

norton That looks stunning! I know... 20th July 2015, 03:53 PM

Rosco Haha thanks, your not the... 20th July 2015, 10:32 PM

Rosco Got the car spun over tonight... 20th July 2015, 10:34 PM

Rosco Then I drilled all the holes... 20th July 2015, 10:35 PM

SteveH1 Faip play cracking... 21st July 2015, 08:10 AM

Rosco I got them off ebay, but... 21st July 2015, 10:35 PM

Rosco Made myself a rivnut tool... 23rd July 2015, 07:57 PM

Rosco Just the right amount of... 24th July 2015, 07:29 AM

norton Hi again, can I ask what size... 25th July 2015, 06:20 PM

norton Hi, what size rivets did you... 25th July 2015, 06:28 PM

norton Stupid forum! Sorry I wasn't... 26th July 2015, 07:56 AM

Rosco No worries mate, I used 4mm... 26th July 2015, 08:58 PM

Rosco This was from last week but... 10th August 2015, 09:11 AM

Rosco Wishbones... 10th August 2015, 09:14 AM

Rosco All sealed and... 10th August 2015, 09:15 AM

Rosco http://i133.photobucket.com/al... 10th August 2015, 09:11 AM

Rosco Right I'm back on the updates... 18th August 2015, 10:24 PM

Rosco Engines back in to with... 18th August 2015, 10:26 PM

norton Jealousy is flowing freely... 19th August 2015, 06:17 PM

Rosco Haha thanks! Urm I dunno... 19th August 2015, 07:55 PM

Rosco On the lathe tonight, I made... 19th August 2015, 07:55 PM

norton Ah good, I thought I was over... 19th August 2015, 08:50 PM

Rosco Bit more done tonight, I made... 20th August 2015, 10:06 PM

Rosco Fuel filter... 20th August 2015, 10:06 PM

Rosco Update for the weekend, my... 23rd August 2015, 09:31 PM

Rosco Front http://i133.photobucket... 23rd August 2015, 09:32 PM

vmax1974 Its still the cleanest build... 23rd August 2015, 11:02 PM

Rosco Thanks, the grimes in my... 25th August 2015, 09:12 PM

Rosco Well ordered some brake pipe... 25th August 2015, 09:12 PM

Rosco Made my bellcrank for my gear... 28th August 2015, 06:52 PM

Rosco What a day! Got the engine... 29th August 2015, 07:36 PM

norton Congratulations, it's really... 29th August 2015, 08:15 PM

Rosco Cheers, so good to get it... 29th August 2015, 08:21 PM

norton Cheers, yes it's coming... 29th August 2015, 08:37 PM

Rosco Cheers, air box, yes I'm... 29th August 2015, 08:39 PM

Rosco Today's job was brake pipes,... 31st August 2015, 07:19 PM

Rosco http://i133.photobucket.com/al... 31st August 2015, 07:20 PM

twinturbo Some very tidy work going on... 31st August 2015, 08:37 PM

SeriesLandy Looking spot on like... 31st August 2015, 10:02 PM

Rosco Ok thanks for that, do you... 1st September 2015, 07:39 AM

Rosco Just had a search and ash had... 1st September 2015, 07:46 AM

SeriesLandy Yeah I agree, rivets look... 1st September 2015, 10:41 AM

Rosco Yeah that's cool cheers, I've... 1st September 2015, 09:47 PM

Rosco Right, got my brake lines... 1st September 2015, 09:47 PM

Rosco Well i sent David Rae my diff... 2nd September 2015, 07:54 PM

Rosco Good bit done tonight, I... 3rd September 2015, 09:02 PM

Rosco Just need to trim the ends to... 3rd September 2015, 09:03 PM

Rosco A full day of sticky wiring... 6th September 2015, 06:14 PM

Rosco http://i133.photobucket.com/al... 6th September 2015, 06:15 PM

Rosco Here's Big Macs off... 6th September 2015, 07:53 PM

Rosco Change of plan haha I've just... 6th September 2015, 08:28 PM

Rosco Right well I've mocked up air... 7th September 2015, 07:21 PM

norton If needed, could the bonnet... 7th September 2015, 07:27 PM

Ianr From what I've heard on other... 7th September 2015, 10:55 PM

Rosco yeah i thought that but i... 8th September 2015, 09:47 AM

Rosco Not many photos tonight but... 14th September 2015, 07:58 PM

Rosco Next is to suit an itg... 14th September 2015, 08:00 PM

Rosco Well got all my anodizing... 16th September 2015, 08:52 PM

Rosco Brake tags bonded and riveted... 16th September 2015, 08:54 PM

Rosco My air trumpets turned up... 16th September 2015, 08:57 PM

Rosco Well finished my fuel rail... 17th September 2015, 08:53 PM

Rosco http://i133.photobucket.com/al... 17th September 2015, 08:54 PM

flyerncle Don't be tempted to have a... 18th September 2015, 10:21 AM

Rosco ok thanks, how many clicks... 18th September 2015, 10:31 AM

K4KEV I seem to recall from my... 18th September 2015, 10:34 AM

flyerncle Long time ago ....:p 18th September 2015, 03:48 PM

flyerncle As long as you get good... 18th September 2015, 03:51 PM

norton That's looking super, really... 18th September 2015, 06:25 PM

Rosco Lol cheers, it's getting... 18th September 2015, 09:09 PM

norton Ah, so there's some work... 19th September 2015, 05:22 PM

Rosco Yeah a little lol, but I do... 19th September 2015, 05:44 PM

Rosco Well more done today, made... 19th September 2015, 06:07 PM

Rosco More done today, loads of... 20th September 2015, 05:54 PM

Rosco Steering rack and track rods... 26th September 2015, 07:10 PM

Rosco I removed the pins from the... 26th September 2015, 07:12 PM

Rosco Had a morning on my dads cnc... 27th September 2015, 08:42 PM

Rosco http://i133.photobucket.com/al... 27th September 2015, 08:43 PM

norton Is that a home brew cnc... 28th September 2015, 03:38 PM

Rosco Yes mate, it's wicked, he's... 28th September 2015, 07:45 PM

Rosco Well got a few jobs done this... 1st October 2015, 09:19 PM

Rosco Right update time, been... 9th October 2015, 09:24 PM

Rosco http://i133.photobucket.com/al... 9th October 2015, 09:26 PM

Rosco New gear lever... 9th October 2015, 09:26 PM

SeriesLandy Looking spot on like... 9th October 2015, 11:22 PM

Rosco Cheers for that, I will have... 11th October 2015, 09:33 PM

Rosco Almost two full days of... 11th October 2015, 09:33 PM

Rosco Water pump removed, need to... 11th October 2015, 09:34 PM

norton Look great as always? Why the... 14th October 2015, 04:55 PM

voucht I'm sure Rosco will have an... 14th October 2015, 05:52 PM

Rosco cheers for that Sylvain, yeah... 15th October 2015, 08:11 AM

voucht You're right, that is another... 15th October 2015, 01:37 PM

norton I need the same continuation... 15th October 2015, 02:02 PM

Rosco Yeah It could be done with an... 15th October 2015, 06:48 PM

Rosco Right small update, had to... 22nd October 2015, 10:01 PM

Rosco Relay bracket fitted and... 22nd October 2015, 10:01 PM

SteveH1 Hi Rosco Where did you get... 27th October 2015, 08:54 PM

Rosco lights from... 28th October 2015, 02:04 PM

SteveH1 Thanks nothing specific at... 28th October 2015, 11:37 PM

norton I've bookmarked them. Their... 29th October 2015, 11:59 AM

Rosco yeah the headlights are... 30th October 2015, 08:43 AM

Rosco Got my electric water pump... 7th November 2015, 09:45 PM

Rosco Right, I've been busy on the... 10th November 2015, 09:06 PM

Rosco http://i133.photobucket.com/al... 10th November 2015, 09:07 PM

twinturbo Plumbing looks... 10th November 2015, 09:25 PM

Rosco cheers, yeah there just for... 11th November 2015, 08:41 AM

norton Grrrrrr... 11th November 2015, 08:49 PM

Rosco Haha i started before you! It... 11th November 2015, 08:52 PM

vmax1974 Indeed where he getting that... 11th November 2015, 10:17 PM

Rosco well you got me! I'm afraid... 12th November 2015, 09:11 AM

vmax1974 Thats ok I will ger over it... 12th November 2015, 04:48 PM

flyerncle Gel over it......:p 13th November 2015, 10:54 AM

Rosco Right full day again today,... 14th November 2015, 05:53 PM

Rosco Then got the engine bay loom... 14th November 2015, 05:54 PM

Rosco Pedal back stops... 16th November 2015, 08:16 PM

Rosco That was yesterday, then... 16th November 2015, 08:17 PM

Rosco Right well ordered my shocks... 2nd December 2015, 07:55 PM

norton Great idea re the colour! 3rd December 2015, 04:01 PM

Rosco Right, update time! It's been... 17th December 2015, 08:36 PM

Rosco Marking out for the first... 17th December 2015, 08:38 PM

Rosco http://i133.photobucket.com/al... 17th December 2015, 08:40 PM

Rosco http://i133.photobucket.com/al... 17th December 2015, 08:42 PM

Rosco First fit of rear wheels, all... 17th December 2015, 08:43 PM

jps The quality of your build is... 7th July 2016, 04:32 PM

metal matt Hi pal. Been a bit quiet... 19th July 2016, 04:07 PM

Rosco Hi mate, yeah bit quiet, just... 19th July 2016, 09:10 PM

Rosco Only just seen this, Haha... 19th July 2016, 09:15 PM

Rosco Well guess a little update is... 18th August 2016, 09:40 PM

Rosco Well got the wheel bearings... 21st August 2016, 07:47 PM

Rosco http://i133.photobucket.com/al... 21st August 2016, 07:48 PM

Rosco Well got my first track day... 10th September 2016, 07:35 PM

garyt funny how the old set up was... 11th September 2016, 08:45 AM

metal matt Nice one. Looking forward to... 11th September 2016, 09:35 AM

Rosco bit of an update, did my... 10th November 2016, 10:17 PM

TSM Locost Now in CKC , nice one :D... 11th November 2016, 08:35 AM

Rosco haha thanks, Hows it Read?... 11th November 2016, 09:35 AM

TSM Locost No less than 6 pages and... 11th November 2016, 11:54 AM

Rosco brilliant, i think he said... 11th November 2016, 12:36 PM

norton Looking great as always! Have... 11th November 2016, 12:59 PM

Rosco I have took a few but so... 11th November 2016, 09:38 PM

Rosco Well I'm still here, decided... 20th January 2017, 07:32 AM

norton It all looks awesome, great... 17th December 2015, 08:45 PM

norton http://i14.photobucket.com/alb... 17th December 2015, 08:49 PM

Rosco Cheers pal, I've got a few... 17th December 2015, 08:50 PM

Rosco Yeah that's cool as, that was... 17th December 2015, 08:51 PM

SteveH1 Lookin good If you don't... 17th December 2015, 09:03 PM

Rosco from here mate... 18th December 2015, 10:46 AM

SteveH1 Did that price include... 18th December 2015, 12:14 PM

K4KEV Rosco ...you might want to re... 18th December 2015, 12:24 PM

flyerncle Knowledge and too much info... 18th December 2015, 12:39 PM

SeriesLandy Lol. I used kev's design and... 19th December 2015, 11:37 PM

voucht I think the book's design for... 20th December 2015, 12:58 PM

MrFozzieBear If you've done the same as me... 20th December 2015, 02:27 PM

Rosco Cheers guys, yeah I gave in... 20th December 2015, 07:33 PM

norton Are you using mx5 or Sierra... 20th December 2015, 07:43 PM

Rosco Sierra :D 20th December 2015, 07:48 PM

norton Ah, I've been looking for an... 20th December 2015, 07:58 PM

Davidbolam Westfield sell these for 35... 20th December 2015, 08:01 PM

norton Ahhhh, I've been searching... 20th December 2015, 08:09 PM

Davidbolam I phoned Westfield parts and... 21st December 2015, 01:33 PM

Rosco Right I've had three full... 1st January 2016, 07:08 PM

Rosco Space heat foil stuck on the... 1st January 2016, 07:08 PM

Rosco Next job Dashboard, I've been... 1st January 2016, 07:09 PM

Rosco I was in the zone and forgot... 1st January 2016, 07:10 PM

Rosco And a full shot for a change,... 1st January 2016, 07:10 PM

metal matt Looking good there Rosco.... 2nd January 2016, 10:46 AM

jason 82 Loving the build, colour is... 2nd January 2016, 02:34 PM

Rosco Cheers pal! Yeah a cnc is... 2nd January 2016, 03:18 PM

Rosco Got a bit more done... 2nd January 2016, 03:18 PM

metal matt Yes it is real carbon but... 2nd January 2016, 04:58 PM

Rosco Looks wicked! 3rd January 2016, 08:42 PM

Rosco Quick update from today, me... 3rd January 2016, 08:43 PM

RichardH how did you do the front of... 3rd January 2016, 10:28 PM

SeriesLandy I used 4 as the Saturn... 3rd January 2016, 11:51 PM

Rosco yeah the bonnet has some... 4th January 2016, 01:04 PM

rpjg1975 I managed to get an rs boss... 4th January 2016, 01:32 PM

MrFozzieBear I used two aero Aero Catches... 4th January 2016, 01:42 PM

Rosco Bit of an update, I've been... 23rd January 2016, 08:11 PM

Rosco Got some logos made up for my... 23rd January 2016, 08:13 PM

Rosco I used m5 rubber well nuts in... 23rd January 2016, 08:15 PM

Rosco http://i133.photobucket.com/al... 23rd January 2016, 08:17 PM

Rosco Both covers in... 23rd January 2016, 08:17 PM

TalonMotorFabrication Don't you just hate builds... 24th January 2016, 11:00 AM

Rosco Haha cheers, I will take that... 24th January 2016, 07:10 PM

Rosco Was on my lathe at 6am... 24th January 2016, 07:10 PM

Rosco Bracket... 24th January 2016, 07:11 PM

Rosco That's the engine bay about... 24th January 2016, 07:12 PM

Rosco Got all my tunnel panels back... 30th January 2016, 08:13 PM

norton Could you maybe consider at... 30th January 2016, 08:46 PM

Rosco Maybe.......... 30th January 2016, 08:49 PM

norton Arrrgh, sodding spell check.... 30th January 2016, 08:50 PM

Rosco Haha yeah but I'm not going... 30th January 2016, 08:54 PM

norton Did you use a 1/2"... 31st January 2016, 12:05 PM

Rosco Hahahaha :D :D 7th March 2016, 07:13 PM

Rosco Hi guys, been a while since... 7th March 2016, 07:13 PM

Rosco Tapered sleeves made for... 7th March 2016, 07:16 PM

Rosco Fog and reverse light plinths... 7th March 2016, 07:17 PM

garyt first of all congrats on the... 7th March 2016, 07:27 PM

SeriesLandy Congrats on your little girl.... 7th March 2016, 08:14 PM

alga Hey, aren't those sleeves... 13th March 2016, 12:10 AM

Rosco Cheers mate, yeah sure we... 18th March 2016, 09:52 AM

norton Hey, looking great, I trust... 19th March 2016, 11:40 AM

Rosco Cheers pal, no I've not to be... 19th March 2016, 02:44 PM

Rosco Bit of a late one tonight but... 21st March 2016, 11:28 PM

garyout Your build is just shouting... 22nd March 2016, 03:40 PM

Rosco cheers pal, theres no reason... 23rd March 2016, 08:56 AM

garyout All the cnc bits and bobs I'd... 23rd March 2016, 07:59 PM

twinturbo Well Tidy ;) TT 23rd March 2016, 09:37 PM

Rosco Got a few more jobs done The... 27th March 2016, 04:58 PM

Rosco http://i133.photobucket.com/al... 27th March 2016, 05:01 PM

Rosco Glued some indicators into... 27th March 2016, 05:02 PM

Rosco http://i133.photobucket.com/al... 27th March 2016, 05:03 PM

Rosco Bit of an update Front grill... 5th April 2016, 09:47 PM

Rosco http://i133.photobucket.com/al... 5th April 2016, 09:48 PM

flyerncle 2nd to none cracking build .:D 6th April 2016, 11:43 AM

Rosco Cheers mate :D 19th April 2016, 09:22 PM

Rosco Bit more of an... 19th April 2016, 09:22 PM

norton Jealous. Has it moved under... 20th April 2016, 01:56 PM

Rosco Not yet :eek: :eek: :eek:... 20th April 2016, 03:26 PM

Rosco Got a bit more done this... 24th April 2016, 08:14 PM

Rosco Finished the wheel arch light... 24th April 2016, 08:15 PM

Rosco Rear wiring loom all finished... 24th April 2016, 08:17 PM

Rosco Got a little job that was... 25th April 2016, 08:46 PM

Rosco Good half a day today trying... 30th April 2016, 05:31 PM

Rosco Well had a phone call today,... 4th May 2016, 09:27 PM

SteveH1 Nothing like a deadline to... 4th May 2016, 09:41 PM

norton Well done, I'm sure the... 5th May 2016, 07:06 PM

garyt great that will concentrate... 5th May 2016, 07:13 PM

Rosco Haha cheers guys, we will see... 6th May 2016, 08:32 PM

Rosco Right, had a few weeks off... 21st May 2016, 07:56 PM

Rosco Sunday's progress Locating... 23rd May 2016, 07:43 PM

Rosco Little mid week update Made... 26th May 2016, 08:03 PM

metal matt Getting there. I really cant... 27th May 2016, 08:00 AM

Rosco Had a good day today, got... 28th May 2016, 08:52 PM

garyt yeah that's a good days work... 29th May 2016, 08:20 AM

Rosco Well didn't get much done... 29th May 2016, 08:55 PM

Rosco Right all day again today,... 30th May 2016, 07:45 PM

Rosco Bit of edge trim on the... 30th May 2016, 07:47 PM

Rosco http://i133.photobucket.com/al... 30th May 2016, 07:48 PM

Rosco http://i133.photobucket.com/al... 30th May 2016, 07:49 PM

Rosco Little bit done tonight, the... 31st May 2016, 09:22 PM

Rosco Well after waiting 3 months... 3rd June 2016, 08:46 PM

garyt I like the spiral wrap idea... 4th June 2016, 11:14 AM

Rosco Well after 18 months of... 4th June 2016, 09:36 PM

Rosco http://i133.photobucket.com/al... 4th June 2016, 09:37 PM

Rosco Well got the reverse motor re... 14th June 2016, 08:31 PM

Rosco http://i133.photobucket.com/al... 14th June 2016, 08:33 PM

vmax1974 Looking great best of luck... 14th June 2016, 09:20 PM

Rosco Cheers pal 14th June 2016, 09:31 PM

SteveH1 Oh how id love to be at that... 14th June 2016, 11:09 PM

metal matt Good luck with Friday. you... 15th June 2016, 07:54 AM

Rosco just keep plucking away at... 15th June 2016, 08:11 AM

flyerncle First class build,I am... 15th June 2016, 12:53 PM

garyt good luck for Friday , sure... 15th June 2016, 07:50 PM

Rosco Cheers guys, yeah fuel cap... 15th June 2016, 08:59 PM

Cropper Just a quick observation, if... 16th June 2016, 01:01 PM

Rosco oh ok, will pick some bulbs... 16th June 2016, 02:05 PM

Rosco wheres your retest at? 16th June 2016, 03:27 PM

RichardH i was looking at headlights... 16th June 2016, 04:54 PM

Cropper Chadderton, 12.30 16th June 2016, 06:55 PM

K4KEV Good luck for tomorrow bud... 16th June 2016, 08:16 PM

Rosco Cheers mate, to be fair it... 16th June 2016, 08:41 PM

Rosco Oh and I got some new bulbs... 16th June 2016, 08:42 PM

Josh Awesome build Rosco, I've... 16th June 2016, 08:54 PM

Rosco Cheers! Just some halfords... 16th June 2016, 08:58 PM

Cropper I bought some from halfords... 16th June 2016, 08:59 PM

Mking Good luck for tomorrow. Look... 16th June 2016, 09:35 PM

Rosco Well got up this morning... 17th June 2016, 02:55 PM

SteveH1 Well done enjoy 17th June 2016, 03:00 PM

RichardH well done we will all post... 17th June 2016, 03:57 PM

vmax1974 Kudos to the cleanest build i... 17th June 2016, 04:54 PM

K4KEV Well done guys nice to know... 17th June 2016, 05:24 PM

vmax1974 one of them started out as my... 17th June 2016, 05:38 PM

garyt congratulations on passing... 17th June 2016, 06:20 PM

metal matt Well done on the first time... 17th June 2016, 08:37 PM

SeriesLandy Well done, good luck with the... 17th June 2016, 10:00 PM

Rosco Haha, Cheers guys! Oh... 17th June 2016, 10:19 PM

Rosco Well its took me all night to... 17th June 2016, 10:21 PM

Rosco Few pics from... 17th June 2016, 10:31 PM

voucht Big "thumb up" for... 18th June 2016, 04:29 PM

Ianr Brilliant news, well done! 18th June 2016, 04:54 PM

Rosco Cheers guys! 18th June 2016, 09:57 PM

Rosco Chapter Two 18th June 2016, 10:06 PM

Rosco Then needed some little... 18th June 2016, 10:08 PM

K4KEV HaHaha...I told you so 19th June 2016, 07:46 AM

Rosco Haha its nearly finished,... 19th June 2016, 07:53 AM

metal matt It's never finished. I want... 19th June 2016, 08:02 AM

Rosco Lol whats on your list? 19th June 2016, 08:15 AM

dean211277 Congratulations on the pass,... 19th June 2016, 04:36 PM

metal matt Its about 2k's worth at the... 20th June 2016, 10:51 AM

Rosco sounds cool, quite a job then... 20th June 2016, 11:16 AM

robj Congratulations on the pass.... 20th June 2016, 12:36 PM

Rosco Haha cheers, yeah it's... 20th June 2016, 09:56 PM

vmax1974 You will have time to draw up... 22nd June 2016, 03:58 PM

Rosco bead roller? need to build a... 22nd June 2016, 04:02 PM

Rosco Got a bit done this week, got... 25th June 2016, 10:04 PM

Rosco Brackets mounted on... 25th June 2016, 10:06 PM

Rosco Getting... 25th June 2016, 10:07 PM

Rosco Fins added, going to nut and... 25th June 2016, 10:09 PM

Rosco Got some bonnet vents fitted,... 28th June 2016, 10:18 PM

Rosco Also made a gopro... 28th June 2016, 10:18 PM

flyerncle Brilliant job as normal !... 30th June 2016, 10:35 AM

Rosco cheers, yeah i know what you... 4th July 2016, 01:25 PM

metal matt Rosco Any new from the... 4th July 2016, 03:10 PM

flyerncle I find that hard to believe... 4th July 2016, 03:16 PM

Rosco haha, yeah got my reg Friday... 4th July 2016, 03:33 PM

metal matt Happy days I just wish this... 4th July 2016, 07:58 PM

Rosco Sweet, I've not been bothered... 4th July 2016, 09:19 PM

Rosco Right well Friday just gone,... 4th July 2016, 09:19 PM

Rosco Up early Saturday morning,... 4th July 2016, 09:20 PM

Cropper I got my reg on Friday also,... 5th July 2016, 12:41 PM

Cropper Well done on the pass, glad... 17th June 2016, 04:49 PM

norton Hey, Could I ask please where... 14th March 2017, 03:17 PM

Rosco of course,... 14th March 2017, 03:24 PM

norton You're a star! Yes I've... 14th March 2017, 03:32 PM

jps Rosco - I see all your photos... 10th October 2017, 07:30 PM

Rosco http://s133.photobucket.com/us... 12th October 2017, 07:45 AM

norton Any updates Rosco? 26th May 2018, 05:07 PM

norton Congratulations! Babies are... 7th March 2016, 08:52 PM

vmax1974 Congrats on the arrival 7th March 2016, 09:18 PM

wylliezx9r Yes I am serious and don't ... 7th March 2016, 09:36 PM

Rosco Cheers guys!!! Yeah it's... 12th March 2016, 08:21 PM

Rosco Then today got the wheels on... 12th March 2016, 08:23 PM

Rosco Then my mate called by with... 12th March 2016, 08:24 PM

metal matt Nice work as always and I'm... 12th March 2016, 10:07 PM

Rosco Well me and my dad have had... 20th December 2015, 08:18 PM

Rosco Rear tub... 20th December 2015, 08:19 PM

Rosco Finished product in... 20th December 2015, 08:20 PM

norton Tidiest build by far! 20th December 2015, 08:27 PM

rpjg1975 That's dangerous if you have... 29th October 2015, 01:26 PM

SteveH1 Who are you tellin. Theres... 29th October 2015, 01:34 PM

Rosco I've figured out how to add... 18th September 2015, 09:07 PM

voucht If you will have a... 21st July 2015, 10:24 AM

flyerncle LAS Aerospace for cleco... 21st July 2015, 03:17 PM

tkpm There made just down the road... 21st July 2015, 07:14 PM

Rosco http://m.ebay.com/itm/38086863... 21st July 2015, 10:37 PM

Rosco Well got the rest of the... 22nd July 2015, 08:36 PM

voucht As I've already said, this... 20th July 2015, 03:36 PM

Rosco I could do pal, if I was to... 15th July 2015, 08:59 PM

Rosco Ok cheers, s2000 would have... 1st January 2015, 01:20 PM

garyt [QUOTE=Rosco;99095]Your build... 31st October 2014, 08:55 PM

Rosco We had another good weekend,... 2nd November 2014, 06:07 PM

Rosco http://i133.photobucket.com/al... 2nd November 2014, 06:08 PM

Rosco Then made some foot plates... 2nd November 2014, 06:08 PM

Rosco http://i133.photobucket.com/al... 2nd November 2014, 06:09 PM

Rosco http://i133.photobucket.com/al... 2nd November 2014, 06:10 PM

Rosco Got a bit done tonight, made... 2nd February 2015, 09:10 PM

Rosco Few hours tonight but was... 4th February 2015, 07:43 PM

Rosco Well I've been doing a few... 15th February 2015, 02:59 PM

Rosco Drawings ready for my laser... 15th February 2015, 06:58 PM

More replies below current depth...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode