Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 18th December 2009, 11:31 PM
DaddyA's Avatar
DaddyA DaddyA is offline
Senior Member
 
Join Date: Jan 2009
Location: Saltash, Cornwall
Posts: 263
Default Coil Pack location?

Hi,

I'm currently cracking on with the wiring and wondered where's the best place to put the coil pack?

Was thinking of putting it on a bracket at the back of the engine - would vibration / heat be a problem?

Or should I stick it just in front of the scuttle near the battery?

Open to suggestions (nice ones obviously)!!
__________________
Cheers

Daz...

http://s641.photobucket.com/albums/uu133/tashlotty/
Reply With Quote
  #2  
Old 19th December 2009, 08:09 AM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,393
Default

Best on the engine if you can find a suitable place. Ford usualy mount them on there.

Keep it away from direct heat like the exhaust.

TT
Reply With Quote
  #3  
Old 19th December 2009, 09:52 AM
DaddyA's Avatar
DaddyA DaddyA is offline
Senior Member
 
Join Date: Jan 2009
Location: Saltash, Cornwall
Posts: 263
Default

Cheers TT,

Theres a few spare tapped holes on the back of the head, next to where I've put the thermostat housing, it will get hot but not exhaust temp hot.

Always get another if it goes wrong
__________________
Cheers

Daz...

http://s641.photobucket.com/albums/uu133/tashlotty/
Reply With Quote
  #4  
Old 19th December 2009, 10:59 AM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

It'll be fine monted at the rear of the head, that is where it is normally located on the Zetech engine, right next to the thermostat housing

If memory serves me right.
The wasted spark type coil pack is located on the engine in all UK spec fords
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
  #5  
Old 19th December 2009, 12:33 PM
les g les g is offline
Senior Member
 
Join Date: Jan 2008
Location: S.E.Cornwall
Posts: 760
Default

Yep you,re right Ronnie
keeps the length of the leads nice and short
Reply With Quote
  #6  
Old 19th December 2009, 01:42 PM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

i put mine on the bulkhead. i only did it because i couldnt be bothered to make a bracket to mount it on the pinto
Reply With Quote
  #7  
Old 19th December 2009, 03:36 PM
DaddyA's Avatar
DaddyA DaddyA is offline
Senior Member
 
Join Date: Jan 2009
Location: Saltash, Cornwall
Posts: 263
Default

Cheers Fella's,

I'd make the bracket today, however, its snowing and a bit on the chilly side.

Time to play in the Quattro
__________________
Cheers

Daz...

http://s641.photobucket.com/albums/uu133/tashlotty/
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:22 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.