Lights as a work in progress

[TheArf]

Can someone tell me if this has worked please





Arfon

[K4KEV]

Gonna have to be cruel Arfon....it just does not look right ,

[TheArf]

Its not cruel Kev as I value opinions what is it your not keen on

Arfon

[K4KEV]

just the indicator looks "flung on"....angled h/l mount is fine after all that how I did my indy..again just my opinion bud

[twinturbo]

I would say the ofsetting of the indicator looks a Little strange .

Like the aerofoiled tube though

TT

[K4KEV]

What might look fairly cool would be if the indy mounting bolt was used as the same bolt for the up/down movement on the headlight,

[Oscar]

Same as kev, something just looks a little odd about the indicator there. If it could be out sideways...

Also, that tube and the raised aspect looks awesome

[TheArf]

I see what your saying about the indicator the problem might be that if I send the indicator out to the side it may foul on the cycle wing.
It's easy to remove the indicator the thing I like most is that I managed to get all the wires through the main boss to go down the inside of the arm keeping everything tidy and minimal with the wiring

Arfon

[SeriesLandy]

I've been thinking similar to you, except like the caterham indicators. However I don't think they will go through iva due to being to far in board. It's worth checking the measurements to see if they are ok.

[Talonmotorsport]

If I may suggest welding a threaded boss to the tube and mounting the indicator to it like this, you can still run the wires through and it keeps them away from the arches.