#1
|
||||
|
||||
Brake pipe.
Just after you thoughts really,
already ran the front brake pipes as per book (to the brackets welded to chassis) before finding out that you cannot have a flexible hose running through the ali side. I have now moved the mounting points to the ali sides (with reinforcement ring), but now one of the pipes is not long enough. Do I replace the whole brake line or should I just put an inline joiner in and add the extra I need. I think I know which way I might go, just wanted ideas. |
#2
|
||||
|
||||
Personaly Daz
I would make a new pipe .... Although I doubt a joiner would fail the IVA, the tester may find it less than ideal & might look closer to see if short cuts have been made elsewhere
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#3
|
||||
|
||||
Cheers Ronnie,
I was leaning that way anyway, plus I can try again to get it above the chassis rail (near MC. Anyone got spare brake line??? (Joking) |
Thread Tools | |
Display Modes | |
|
|