Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 6th November 2009, 10:48 PM
londonsean69 londonsean69 is offline
Senior Member
 
Join Date: Nov 2008
Location: Surrey/South London Border
Posts: 453
Default Grrr paint

Have spent a jolly couple of hours spraying the chassis in primer.

Then noticed a couple of welds that were still only tacked

Still, better to notice them now, than when the chassis falls apart at 70mph.

So, things I have learned this evening
  • Painting is boring, but a spraygun makes it bearable
  • It's easy to miss a weld with this many joints (not the smokey kind )
  • Painting is boring
  • Overspray gets everywhere
  • Painting is boring
  • Use lots and lots lots and lots lots and lots lots and lots of dustsheets
  • Painting is boring
  • Putting your elbow in the can of primer is not a good idea
  • Did I mention, Painting is boring

Obviously, said paint is now drying, so I have time (and primer) on my hands, hence the overly excessive use of formatting

Anyone else had a fun evening???
__________________
Sean
Reply With Quote
  #2  
Old 6th November 2009, 11:13 PM
gingea1pom's Avatar
gingea1pom gingea1pom is offline
Senior Member
 
Join Date: Sep 2009
Location: wiltshire
Posts: 826
Default Websters cause

Not a fun evening but a very satisfying,

I have just finished a 427 page report complete with two site diagrams, critical path analysis, cross sectional diagrams and mass haul calcs. Finished 4 days early. Happy days.
__________________
Sent from my iPad, from who knows where in the world

I was building but I am not now!


Build Pictures


Build Thread
Reply With Quote
  #3  
Old 6th November 2009, 11:21 PM
HandyAndy's Avatar
HandyAndy HandyAndy is offline
Senior Member
 
Join Date: Jan 2009
Location: cleveland
Posts: 3,917
Default

i remember the thread i started titled "bl@@dy paint"

and yes i found the odd weld that needed doing too

i can smile about it now tho, thanks Sean

andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk
Reply With Quote
  #4  
Old 6th November 2009, 11:27 PM
londonsean69 londonsean69 is offline
Senior Member
 
Join Date: Nov 2008
Location: Surrey/South London Border
Posts: 453
Default

Quote:
Originally Posted by HandyAndy View Post
i remember the thread i started titled "bl@@dy paint"

and yes i found the odd weld that needed doing too

i can smile about it now tho, thanks Sean

andy
Yes, I remember the fun you had

I'm smiling already, because it will be someone else's turn soon

Hopefully crack on with a 2nd coat tomorrow morning (after sorting those welds) and maybe even the 3rd coat of primer in the evening.
Then it's time for colour (whichever I go for in the end)
__________________
Sean
Reply With Quote
  #5  
Old 7th November 2009, 10:52 AM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

I would rate the painting as the worst part of the build

Did you find that about half way through the painting, the cost of powder coating seemed like a bargain

Where do those missed welds come from !!??
I am sure those pesky Pixies sneak in when I am not looking & nick em
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
  #6  
Old 7th November 2009, 11:42 AM
londonsean69 londonsean69 is offline
Senior Member
 
Join Date: Nov 2008
Location: Surrey/South London Border
Posts: 453
Default

Quote:
Originally Posted by Bonzo View Post
I would rate the painting as the worst part of the build
It's certainly shaping up to be, although profiling all the tubes must come close as well

Quote:
Originally Posted by Bonzo View Post
Did you find that about half way through the painting, the cost of powder coating seemed like a bargain
I have thought about PC, but I don't yet have an engine, so need to put the mounts in when I decide what I'm doing. Plus, if I had sent it to the powdercoaters, I would not have noticed the missing welds

Quote:
Originally Posted by Bonzo View Post
Where do those missed welds come from !!??
I am sure those pesky Pixies sneak in when I am not looking & nick em
I don't know, surely there must be a system for making sure they are all done, it is soo easy to become blind to it once you have just spent a few hours welding up all the joints.

Maybe use little strips of insulating tape on every weld position, then take them off just before the actual weld??
__________________
Sean
Reply With Quote
  #7  
Old 7th November 2009, 11:46 AM
adrianreeve adrianreeve is offline
Senior Member
 
Join Date: Mar 2007
Posts: 401
Default

Life really is too short for some jobs!

Definately getting everything powdercoated, I've done my years of spraying stuff in a single garage (quite a few whole cars!) and covering everything with overspray, no matter how many dustsheets you use, getting high on paint fumes, annoying the neighbours etc.!

The cost of powdercoating really isn't that bad against the material costs for a good paint job, and while everything is out of your garage for a week, you can finish paintig the donor parts and clear the garage up ready for the clean work of assembly.

Cheers

Adrian
Reply With Quote
  #8  
Old 7th November 2009, 01:08 PM
londonsean69 londonsean69 is offline
Senior Member
 
Join Date: Nov 2008
Location: Surrey/South London Border
Posts: 453
Default

Quote:
Originally Posted by adrianreeve View Post
Life really is too short for some jobs!

Definately getting everything powdercoated, I've done my years of spraying stuff in a single garage (quite a few whole cars!) and covering everything with overspray, no matter how many dustsheets you use, getting high on paint fumes, annoying the neighbours etc.!

The cost of powdercoating really isn't that bad against the material costs for a good paint job, and while everything is out of your garage for a week, you can finish paintig the donor parts and clear the garage up ready for the clean work of assembly.

Cheers

Adrian

well, luckily enough I have a double garage, but it is full of the usual junk (Lawn mowers, mountain bike etc.).

I use a proper mask, so the fumes are no bother. Plus, the paint I am using uses White spirit for a solvent, so not a giddy high inducing as others anyway.

I would have had it powder coated, but the chassis isn't actually finished, still need to do engine & gearbox mounts, oh and headlight mounts.

The donor parts are all done, they were done before I had the steel for the chassis. Everything is cleaned, rebuilt, painted, labelled, and stored in plastic bags or boxes

Anyway, just fired on the second coat of primer. It will get a third coat tomorrow evening, then left for a couple of days to dry off. Then it's colour time

Due to the lingering paint fumes, the garage is gonna be out of bounds today, so am just going to clean my ChAvSTRA, as in REALLY clean it
__________________
Sean
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:14 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.