#1
|
||||
|
||||
Is this in the right place?
Started mounting the engine today just wondering if its in the right place?
|
#2
|
||||
|
||||
Hi, if you mean fore and aft then it looks reasonable as for side to side it needs to be central so if it is all well and good that just leaves the height
which needs to be level or slightly up at the front with the output shaft close but not exactly the same height as the diff flange, there needs to be a slight difference in height to stop the prop u/j's from brinneling. hope it makes sense. Ray |
Thread Tools | |
Display Modes | |
|
|