Fixing Nose Cone

[tkpm]

Hi all,

Does anyone have a picture of how there nose cone is fixed to the chassis (from the bonnet end to the front) if that makes sense, as mine seems to not much of a lip to put fixings through.

Terry

[mark]

Its only a small lip that sits on the chassis inside the nose but there is still room for a couple of m6 bolts on each side rivnutted into the chassis, i cut some big washers almost in half and used these to spread the load a little, i also put another 3 underneath the bottom at the front, again with big washers on them.

[DaddyA]

Hi Terry,

I had the same problem. Not enough on mine for a bolt one side so had to adapt and overcome as they say.

I'll email you some photos.


http://i641.photobucket.com/albums/u...y/DSCN3877.jpg

http://i641.photobucket.com/albums/u...y/DSCN3878.jpg

Couldn't email, too big so here is some links - hopefully of some help.

[tkpm]

Thanks Daz,

Those pictures are just what i needed

Terry

[AshG]

I used m5's on mine with speaker washes top and bottom

[spud69]

I'm afraid the mold for the nose cone doesn't allow for much a flange to be formed for fixing of the nose cone. Going to have a go at modifying the mold soon to allow for better fixing.

It does fix on okay at the moment, if not a little awkward.

Regards.....AndyH

Fix it at the bottom then use a dzeus fastner where it meets the bonnet so it holds both the nose cone and the bonnet......simples!

Andy, adding a bit to the flange is easy done if you feel the need..clamp some wood to the flange while it's off the nose with enough to give a bigger flange then simply gel and 'glass it ....resulting in a wider flange


Any news on the single seater beastie? I made me own but the engine may be a problem oh and will fry the IVA bods brains...

[spud69]

Kayak's is looking good Mark, that is the plan with the nose - some pvc trim

Single seater is done to Mark, Chris has trial fitted it and reports that all is hunky dorey...

AndyH

Cool when can I see a picture of the beastie?

[spud69]

Originally Posted by fabbyglass

Cool when can I see a picture of the beastie?

Hopefully after Chris had got back from his hols we can tease some pics out of him....