#1
|
|||
|
|||
Front wing stay brake clearance
Hi
I'm in the middle of making the front wing stays to the book plans, and all seemed OK until I fitted the brake caliper. The stay runs right across the back of the caliper and I don't think there's enough clearance: Front - Above - Wing stay clearance.JPGFront - Behind - Wing stay clearance.JPG Has anyone else had the same problem or have I just made it wrong? Matt |
#2
|
||||
|
||||
I had to notch my tube local to where the hose goes into the caliper. I didn't make mine, got em from Saturn Sports Cars. But I assume they follow the book?
|
#3
|
|||
|
|||
Problem solved - I remade them with a kink in the rear support so the tube goes under the bulge in the caliper then up to the mounting point on the wing.
I think I may have found the cause too - it turns out I've the larger front disks (~280mm), not the ones I thought I had so the caliper position/size may be slightly different. Matt |
Thread Tools | |
Display Modes | |
|
|