#1
|
|||
|
|||
Steering rack from a Mark 1 Escort
I have been offered a steering rack from a Mark 1 escort. Does anybody know if it will do the job or if it has to be one from a Mark 2 as per the book? I have been told it's only the length of the splined shaft that goes to the steering column that is different but can't find any info to back this up. Anybody know any different?
Thanks in advance. |
#2
|
||||
|
||||
Not 100% sure .... But I think you'll find that the Mk1 steering rack uses an imperial thread for the track rod ends.
If this is the case .... Might cause you a little hasle when it comes to the steering rack extensions Sorry, that's the best info I have floating about in that little pea brain of mine
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#3
|
||||
|
||||
MK 1 Racks.
You are correct Ronnie, the Mk1 steering rack uses an imperial thread for the track rod ends.
__________________
Be Lucky, Mike. |
#4
|
|||
|
|||
That's not a big deal as I would have to make extensions anyway so I can put any size thread on them. Anybody know what size thread they are?
Thanks chaps!! |
#5
|
||||
|
||||
Mk1 Rack thread
Although I do not have one here to put my thread gauge on .... I believe the thread may be 1/2" UNF
If you are going to machine your own extensions & have the right tap, tis no real drama ..... You can still thread the outer end with a M14 thread
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#6
|
||||
|
||||
Checked in Burtons Catalogue 1/2" UNF.
__________________
Be Lucky, Mike. |
#7
|
|||
|
|||
Thanks a lot guys, will have a look through my taps this afternoon and see if I have the right one If I don't it's only a tenner to buy a brand new one so I should still be quids in.
Thanks again, Dave. |
#8
|
||||
|
||||
Quote:
I'll have a little look after lunch EDIT Would you believe it !!?? I got 1/2" BSF .... 1/2" Whitworth but no 1/2" UNF Got both sizes of tap, either side of 1/2" UNF though As they say .... It's the thought that counts
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk Last edited by Bonzo : 15th March 2010 at 05:04 PM. |
#9
|
|||
|
|||
Thanks for looking Ronnie. sod's law strikes again
I will have a look in my stash and buy a new one if I don't have one. Dave. |
Thread Tools | |
Display Modes | |
|
|