Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 9th August 2009, 10:14 PM
davidimurray's Avatar
davidimurray davidimurray is offline
Senior Member
 
Join Date: Jan 2009
Location: Near Cardiff
Posts: 742
Default Electrolysis

I see a couple of people have used electrolysis for cleaning parts up. Sounds quite interesting. I was wondering what sort of affect it has on the material. I'm thinking of things like brake calipers - if I was to strip the calipers could I safely clean them up with electrolysis and not damage the bores? Similalry with the the uprights, could the same be done but obviously remove the bearings apart from the outer races, again would the electrolysis damage them?

Cheers

Dave
Reply With Quote
  #2  
Old 9th August 2009, 10:29 PM
RAYLEE29's Avatar
RAYLEE29 RAYLEE29 is offline
Senior Member
 
Join Date: Sep 2008
Location: POOLE DORSET
Posts: 520
Default

there is someone on here that posted pics before it does work very well
you do have to be carefull about hydrogen production
and apparently using stainless as an anode is a big no no some very toxic fumes
also ive read about hydrogen causing the component to become brittle
im not a metalurgist but i dont see this as a big issue as im sure someone on lcb would have put big warnings about it
there is a long term sticky on lcb if you care to go have a look you definately dont have to pay to see it but might have to become a member
Ray
Reply With Quote
  #3  
Old 9th August 2009, 11:32 PM
geeman's Avatar
geeman geeman is offline
Senior Member
 
Join Date: Jun 2009
Location: Croydon
Posts: 318
Default

I did this on one of the front hubs( i took the disc and caliper off and electrolysed it with the hub. ) It seemd to work very well, howver the pics i have dont show it well. Also now the hub i electrolysed seems to spin mor freely) It doesnt become shiney or clean, but it removes any rust and leaves a surface thats relatively easy to clean(i pressure washed it). I would do it for the rest of my parts, but it just takes too long tbh and i cant be bothered as its just mor work.



the one on the left still looks very rusted but it is nothing compared to the one on the right
__________________
my build pics
Reply With Quote
  #4  
Old 9th August 2009, 11:33 PM
Land Locked's Avatar
Land Locked Land Locked is offline
Senior Member
 
Join Date: Apr 2009
Location: Johannesburg, Sarf Efrika
Posts: 232
Default

Quote:
Originally Posted by RAYLEE29 View Post
... you definately dont have to pay to see it but might have to become a member
Ray
Sorry for going off the topic a wee bit, but registration to that site DOES cost, not much but one does need to make a non free phone call to activate the account.
Reply With Quote
  #5  
Old 10th August 2009, 12:00 AM
Matthew Matthew is offline
Member
 
Join Date: Mar 2007
Location: Liphook, Hampshire
Posts: 95
Default

Dave

It doesn't have any visible effect on unrusted metal so you should be OK with the bores and bearings. For the hydrogen embrittlement I've looked a lot on the net and the only place where people have concerns is when de-rusting springs. If you are worried then there are suggestions the baking in an oven for some time (can't remember how long) reverses the effect. I can't see how a day long treatment on a large lump of cast iron like a caliper is going to make any difference at all.

My personal opinion is it's the nearest thing to magic I've seen in a long time. You can see from the attached pictures the change to heavily rusted metal

One thing you do have to watch out for is that anything you treat then starts rusting again at an amazing rate - there's a fine coat of rust within days so it is best to give parts a quick coat of paint straight away.

Matt
Attached Images
File Type: jpg P5101534-small.JPG (27.8 KB, 64 views)
File Type: jpg P5101535-small.JPG (27.7 KB, 59 views)
Reply With Quote
  #6  
Old 10th August 2009, 12:15 AM
geeman's Avatar
geeman geeman is offline
Senior Member
 
Join Date: Jun 2009
Location: Croydon
Posts: 318
Default

yep id have to agree with you matt as my hub has rusted amazikngly fast since i electrolysed it a few days. next time ill paint ti as soon as the electrolosis finishes
__________________
my build pics
Reply With Quote
  #7  
Old 10th August 2009, 12:59 AM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

i used electrolysis to get the worst off then went at it with the angry grinder with twisted wire brush
Reply With Quote
  #8  
Old 10th August 2009, 02:42 PM
Jimmyd Jimmyd is offline
Senior Member
 
Join Date: Jul 2008
Location: Portaferry, Co Down
Posts: 246
Default

Another before and after pic for you. I did give the finish a rub with a wire brush before taking the picture.

J
Attached Images
File Type: jpg CIMG2363.jpg (93.4 KB, 59 views)
Reply With Quote
  #9  
Old 10th August 2009, 03:22 PM
geeman's Avatar
geeman geeman is offline
Senior Member
 
Join Date: Jun 2009
Location: Croydon
Posts: 318
Default

Quote:
Originally Posted by Jimmyd View Post
Another before and after pic for you. I did give the finish a rub with a wire brush before taking the picture.

J
hi, i wondered what sort of current and voltages you are running to get those results and for how long on those paticular parts. THanks
__________________
my build pics
Reply With Quote
  #10  
Old 10th August 2009, 03:32 PM
londonsean69 londonsean69 is offline
Senior Member
 
Join Date: Nov 2008
Location: Surrey/South London Border
Posts: 453
Default

Quote:
Originally Posted by geeman View Post
hi, i wondered what sort of current and voltages you are running to get those results and for how long on those paticular parts. THanks
I have a cheap and nasty Halfords charger, it's only for small cars, puts out about 4 amps (I think). It does the job perfectly on anything I have tried so far - Uprights, Hubs etc.

The voltage is usually just over 12V

It really doesn't matter what you use - it's magic

Sean
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:51 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.