Quote:
Originally Posted by steve8274
hi david
my loom has the single green wire dedicated for reverse switch. one side is at rear for light itself and then other side just leads out of loom to connect to reverse switch
|
Ah right, connect that to one wire on the gearbox, and connect the other gearbox wire to 12v ignition live.
__________________
~
My Build Diary -
http://davesroadster.blogspot.com/
*updated 7/6/11*
Best bit so far: Getting it running
Worst bit so far: Cutting steel for wishbones and engine mounts.
Most annoying bit so far: Generator packing up half way through welding.