Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
Reload this Page few electrical queries
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 21st October 2010, 06:03 PM
David_17's Avatar
David_17 David_17 is offline
Senior Member
  
Join Date: May 2010
Location: Teesside
Posts: 544
Default
Quote:
Originally Posted by steve8274 View Post
hi david
my loom has the single green wire dedicated for reverse switch. one side is at rear for light itself and then other side just leads out of loom to connect to reverse switch
Ah right, connect that to one wire on the gearbox, and connect the other gearbox wire to 12v ignition live.
__________________
~

My Build Diary - http://davesroadster.blogspot.com/

*updated 7/6/11*

Best bit so far: Getting it running
Worst bit so far: Cutting steel for wishbones and engine mounts.
Most annoying bit so far: Generator packing up half way through welding.
Reply With Quote
  #2  
Old 24th October 2010, 01:34 PM
snapper snapper is offline
Senior Member
  
Join Date: May 2007
Location: Chelmsford, Essex
Posts: 360
Default
You can mount the megajolt in the engine bay but on a 7 the engine bay gets much hotter than a conventional car, the EDIS is known for not liking the heat, and as EDIS and jolt need to be connected with signal shielded cable I found mounting both under the dash/scuttle worked better.
Attaching a laptop for data logging is also easier with the jolt in the car
Reply With Quote
Reply

« Previous Thread | Next Thread »

Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 10:44 AM.

Contact Us - Haynes Online - Archive - Top

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.