|
|
|
|
#1
12th April 2010, 04:51 PM
|
||||
|
||||
oil pressure / temp gauge
Hi all,
I,m about to fit an Oil pressure gauge & an Oil temp gauge, obviously I know where the original pressure point is on the block, so was thinking if its poss to fit both senders for pressure & temp from the same place on the block, or is there another outlet i should use for the oil temp sender? I,ve read that i would need a "sandwich plate fitting" to connect both from the same outlet but its very close to my engine mount & don,t think i,ll be able to fit anything that size so close to the mount. any suggestions ? engine is the 1.8 CVH cheers andy 
|
|
#2
12th April 2010, 05:15 PM
|
||||
|
||||
|
Sandwich plate sits in between the oil filter and engine. I had one on my MR2 turbo for oil pressure and temperature. Super handy. Shame the Ford fitting isn't the same as a Toyota.
http://cgi.ebay.co.uk/SANDWICH-PLATE...mZ360249743117
|
|
#3
12th April 2010, 05:22 PM
|
||||
|
||||
|
ahhh, cheers deezee, i thought the sandwich plate went where the original pressure sender is,
 that helps as i think there,s more space at the filter  cheers andy
|
|
#4
12th April 2010, 05:29 PM
|
||||
|
||||
|
where do i get a sandwich plate from? cheers andy
|
|
#6
12th April 2010, 06:19 PM
|
||||
|
||||
|
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now!  Build Pictures Build Thread
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
