Rosco's haynes Build

[Rosco]

Got the car spun over tonight and got on with marking the rivet holes out, I've gone for 4mm rivets at 45mm spacing, I'm bonding it on to!

I marked the rail centres on first then used a set of dividers to mark the spacing, wasn't as bad as I thought it was going to be and 45mm worked out nicely everywhere which was good for my OCD!





I started drilling a few holes at the back and worked up to the next cross rail, I had brought some cleco pins and glad I did there perfect for the job
Because I had bead rolled the panel it wasn't as flat as a plain sheet, but it pulled flat as I worked my way along



20 cleco pins fitted