Suspension bushes / tubes.

Enoch Suspension bushes / tubes. 5th March 2010, 08:30 AM

deezee The bushes need to be... 5th March 2010, 10:06 AM

spud69 For the bush tubes Enoch you... 5th March 2010, 10:31 AM

twinturbo Tighten them up with the full... 5th March 2010, 10:38 AM

Enoch Thank you very much,... 5th March 2010, 11:43 AM

alga On a related note, what are... 5th March 2010, 05:50 PM

Bonzo Bush tubes 5th March 2010, 06:40 PM

alga Thanks Ronnie, I had to buy... 5th March 2010, 06:53 PM

Bonzo I bought one of the pre-bent... 5th March 2010, 07:06 PM

AshG cross bar needs to be 38mm... 5th March 2010, 07:24 PM

More replies below current depth...

HandyAndy :eek: :eek: :o :D and i... 5th March 2010, 08:32 PM

5th March 2010, 11:43 AM

Enoch

Senior Member

Join Date: Nov 2009

Location: Near Boston, Lincolnshire

Posts: 788

Thank you very much, gentlemen, that's kind of what I thought. On one of mine the suspension bracket is very tight on the bushes rather than the crush tubes. Thanks Spud for the tip on the copper grease, I have some of that so will use it.
Thanks again to all.

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 01:24 PM.