|
|
|
|
#1
3rd June 2010, 09:36 PM
|
||||
|
||||
Hi Matt
I believe most folk have just used a couple of pieces of 25 X 25 instead of a single piece of 25 X 50 ERW square. That is the route I took, just stitch welded the 2 together, probably adds a tad more strength to that area as well  As you can see, it looks the part once fettled & painted  
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk Last edited by Bonzo : 3rd June 2010 at 09:48 PM. 
|
|
#2
3rd June 2010, 09:38 PM
|
||||
|
||||
|
Still very RED Ronnie.
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now! Build Pictures Build Thread
|
|
#3
3rd June 2010, 09:53 PM
|
||||
|
||||
|
Tell me about it Ginge
I have the Epoxy Mastic here, all I need to do now, is find the energy to get it from the tin to the chassis  Pitty really, the build would leap ahead once that has been done, all of the other parts are here & all painted up, ready to fit 
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#4
3rd June 2010, 09:54 PM
|
||||
|
||||
|
Quote:
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now! Build Pictures Build Thread
|
|
#5
3rd June 2010, 10:00 PM
|
||||
|
||||
|
OK I'm sold - it doesn't look too bad.
Nice chassis BTW Thanks Matt
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
