![]() |
|
#1
|
|||
|
|||
![]() I bought mine from Handy Andy / Saturn, one of the best moves I made. Not just because it was a bargain but because the support and help from Andy Saturn added a huge amount of value to my purchase.
Enoch |
#2
|
||||
|
||||
![]() I would recommend handy Andy and saturn. Going way more than the extra mile. Couldn't be more helpful when I had a problem with the bits I had.
I've Also used 3ge for all my plates and wishbones. They were also very good quality. |
#3
|
|||
|
|||
![]() Hi, thanks all for your suggestions,
I have made contact with HandyAndy today and he just needs to know which gearbox and rear tub i'll be using. I just need to do some research now ![]() Thanks again |
#4
|
|||
|
|||
![]() Talon and Andy are two different people,and the attention to detail and help from Andy are second to none.
|
#5
|
|||
|
|||
![]() I've heard enough good things about Talon to have ordered a chassis from him. In fact I have heard good things about Saturn too, it's just that Talon, in my case, is a LOT closer.
|
#6
|
|||
|
|||
![]() i have a kit from handy andy and all i can say is good tube, good value, andy is helpful and will give advice and backup, saves loads of time and trouble and only required minor fettling as any tube kit would !
take it from me im sure you would have no regrets form buying one of andys kits. |
![]() |
Thread Tools | |
Display Modes | |
|
|