|  | 
| 
			 
			#1  
			
			
			
			
			
		 | |||
| 
 | |||
|  Ebay chassis packs or any other suggestions. Hoping to purchase a chassis pack fairly soon, I've seen a few on ebay but was wondering if there were any recommended people/companies on here? Thanks all Chris | 
| 
			 
			#2  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   HandyAndy is your man   
				__________________ ~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. | 
| 
			 
			#3  
			
			
			
			
			
		 | |||
| 
 | |||
|   Talon motorsport. They do flat pack chassis packs or fully welded chassis (plus lots of other bits). i have always been very happy with the service i get from phil (talonmotorspot) and he always goes the extra mile. | 
| 
			 
			#4  
			
			
			
			
			
		 | |||
| 
 | |||
|   Handy Andy has proven to be more than just a seller of flat packs. Couldn't recommend him highly enough. | 
| 
			 
			#5  
			
			
			
			
			
		 | |||
| 
 | |||
|   Hi I got my original chassis from a company no longer in business but would recommend both the andys at saturn and john at 3ge. Russ | 
| 
			 
			#6  
			
			
			
			
			
		 | |||
| 
 | |||
|   I bought mine from Handy Andy / Saturn, one of the best moves I made. Not just because it was a bargain but because the support and help from Andy Saturn added a huge amount of value to my purchase. Enoch | 
| 
			 
			#7  
			
			
			
			
			
		 | |||
| 
 | |||
|   Quote: 
 I assume this is handyandy? http://www.saturnsportscars.co.uk/st...iewCat&catId=8 I'll send him a message. Thanks all for your recommendations  | 
| 
			 
			#8  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   I would recommend handy Andy and saturn. Going way more than the extra mile. Couldn't be more helpful when I had a problem with the bits I had. I've Also used 3ge for all my plates and wishbones. They were also very good quality. | 
| 
			 
			#9  
			
			
			
			
			
		 | |||
| 
 | |||
|   Hi, thanks all for your suggestions, I have made contact with HandyAndy today and he just needs to know which gearbox and rear tub i'll be using. I just need to do some research now   Thanks again | 
| 
			 
			#10  
			
			
			
			
			
		 | |||
| 
 | |||
|   Talon and Andy are two different people,and the attention to detail and help from Andy are second to none. | 
|  | 
| Thread Tools | |
| Display Modes | |
| 
 | 
 |