|
|
|
|
#1
2nd August 2010, 05:47 PM
|
||||
|
||||
yep, as above, the transmission tunnel is different both sides, so the center of the chassis wouldn't work.
The center measurement of the drivers footwell/steering mount can be worked out looking at cp16 (or cp17 I think) it is in the back of the book.
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. 
|
|
#2
2nd August 2010, 05:58 PM
|
||||
|
||||
|
According to my cad model it is 290mm from the centerline of the chassis to the steering column centerline.
Cheers Dave
__________________
http://s831.photobucket.com/user/dav...ter%20Pictures OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt
|
|
#3
2nd August 2010, 10:59 PM
|
|||
|
|||
|
Great thanks guys. Will have another look in the morning with fresh eyes, sure that will help.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
